Additional information
09
26
En
Chapter 9
Additional information
Setting the sleep timer
The sleep timer switches off the receiver subwoofer after
a specified time so you can fall asleep without worrying
about it.
1
1
Press the
SLEEP
button to select an option.
Choose between the following options:
•
SLP ON
– Switches off after about an hour
•
SLP OFF
– Cancels the sleep timer
After selecting
SLP ON
, you can press
SLEEP
again to
check how much time is left. Each line indicates
approximately 12 minutes (remaining):
Dimming the display
You can choose to dim the display if you find it too
bright.
2
1
Press
SETUP
.
2
Use the
/
(cursor left/right) buttons to select
DIMMER
then press
ENTER
.
3
Use the
/
(cursor up/down) buttons to select
LIGHT or DARK then press
ENTER
.
DTS CD setting
If you play a DTS-encoded CD, you will need to change
this setting to hear the decoded signal.
1
Switch the system into standby.
2
Press
SETUP
.
3
Use the
/
(cursor left/right) buttons to select
CD TYPE from the menu, then press
ENTER
.
4
Use the
/
(cursor up/down) buttons to select a
setting, then press
ENTER
.
Select from:
•
NORMAL
– Use for playback of regular audio CDs.
Some DTS-encoded CDs will output noise when
played.
•
DTS-CD
– Use for playback of DTS-encoded CDs, but
note that the beginning of regular CD tracks may be
skipped.
Resetting the system
Use this procedure to reset all system settings to the
factory default.
1
Switch the system on.
2
Press and hold SURROUND then press the
STANDBY/ON button on the display unit.
The next time you switch on, all the system settings
should be reset.
Note
1 The display dims when the sleep timer is set.
2 The display dims when the sleep timer is set, regardless of this setting.
ST
TUNE
ST
ENTER
ENTER
CLEAR
SOUND
SETUP
TEST
TONE
SLEEP
SR
SLEEP
S L P - - - - -
ST
TUNE
TUNE
ST
ENTER
ENTER
CLEAR
SOUND
SETUP
TEST
TONE
SOUND
RETRIEVER
SLEEP
SR
ST
TUNE
TUNE
ST
ENTER
SETUP
HTP-330.book 26 ページ ２００７年３月２７日 火曜日 午後６時８分
