Pioneer HTP-072, Руководство по эксплуатации

Страница: 24 / 112

04
04 Basic playback
24
En
Changing the radio frequency step
If you find that you can’t tune into stations successfully, the
frequency step may not be suitable for your country/region.
Here’s how to switch the setting:
1 Switch the receiver into standby.
2 While holding down TUNE

button, press and hold

STANDBY/ON button for about two seconds.
• The channel tuning step alternates between
10K STEP
and
9K STEP
each time you do this.
Improving FM sound
If the
TUNE
or
ST
indicators don’t light when tuning to an FM
station because the signal is weak, set the receiver to the
mono reception mode.
1 Press BAND to select FM MONO.
This should improve the sound quality and allow you to enjoy
the broadcast.
Saving station presets
If you often listen to a particular radio station, it’s convenient
to have the receiver store the frequency for easy recall
whenever you want to listen to that station. This saves the
effort of manually tuning in each time. This unit can
memorize up to 30 stations.
1 Tune to a station you want to memorize.
See Listening to the radio on page 23 for more on this.
2 Press TOOLS.
The display shows
PRESET
, then a blinking
MEM
and station
preset.
3 Press PRESET
/
to select the station preset you
want.
You can also use the number buttons.
4 Press ENTER.
The preset number stop blinking and the receiver stores the
station.
Note
• If the receiver is left disconnected from the AC power
outlet for over a month, the station memories will be lost
and will have to be reprogrammed.
• Stations are stored in stereo. When the station is stored
in the FM MONO mode, it shows as
ST
when recalled.
Listening to station presets
You will need to have some presets stored to do this. See
Saving station presets above if you haven’t done this already.
1 Press PRESET
/
to select the station preset you
want.
• You can also use the number buttons on the remote
control to recall the station preset.
Naming preset stations
For easier identification, you can name all of your preset
stations.
1 Choose the station preset you want to name.
See Listening to station presets above for how to do this.
2 Press TOOLS twice.
The cursor at the first character position is blinking on the
display.
3 Input the name you want.
Choose a name up to eight characters long.
• Use
PRESET
/
to select character position.
• Use
TUNE
/ to select characters.
• The name is stored when
ENTER
is pressed.
Tip
• To erase a station name, follow steps 1 and 2, and press
ENTER
while the display is blank. Press
TOOLS
while the
display is blank, to keep the previous name.
• Once you have named a station preset, Press
DISP
to
show the name. When you want to return to the frequency
display, press
DISP
several times to show the frequency.
BD DVD
INPUT SELECT
SOURCE SLEEP
TV
CONTROL
CD
INPUT
CH
RECEIVER
TUNER iPod/USB SAT/CBL
GAME TV SIGNAL SEL
Acous.EQ PHASE S.RETRIEVER
VOL
RECEIVER
1
ENTER
2
DISP
3
MUTE
RETURN
AUDIO
PARAMETER
TOOLS
MENU VOLUME
BAND
HOME
MENU
iPod CTRL
PTY
TRE BASS
TOP
MENU
TUNE
TUNE
P
R
E
S
E
T
P
R
E
S
E
T
VSX-324-K-P_DLXE.book 24 ページ ２０１３年３月２１日 木曜日 午前９時１７分