background image

5.1ch

7.1ch

3.1.2ch

5.1.2ch

3.1ch

28

Speaker Installation

 

„

3.1.2 Channel System

High Speakers

a

FHL

FHR

RHL

RHR

3´ (0.9 m)

or more

3´ (0.9 m)

or more

a: 22° to 30°

FHL, FHR

  Place the front high speakers directly above the front speakers, 

angled to face the listening position.

RHL, RHR

  Place the rear high speakers so the lateral distance matches the 

front speakers, angled to face the listening position.

3.1.2 ch connection ( 

→p41

)

3.1.2 ch + ZONE 2 connection ( 

→p42

)

3.1.2 ch (Bi-Amping (Front)) connection ( 

→p43

)

Top Speakers

TFL

TFR

TML

TMR

TRL

TRR

a

b

c

a: 30° to 55°

b: 65° to 100°

c: 125° to 150°

TFL, TFR

  Fit top front speakers on the ceiling in front of the listening 

position.

TML, TMR

  Fit top middle speakers on the ceiling directly above the listening 

position.

TRL, TRR

  Fit top rear speakers on the ceiling behind the listening position.

•  Match the lateral distance of the top speakers to the front speakers.

Dolby Enabled Speakers

a: 22° to 30°

a

DFL

DFR

DFL, DFR

  The Dolby enabled speakers (front) are installed on top of the 

front speakers.

Содержание Elite VSX-LX105









































































































































































Отзывы: