Pioneer Elite VSX-LX105 Скачать руководство пользователя страница 143

Страница: 143 / 168

143

Troubleshooting

BLUETOOTH function

• Unplug and plug the power cord of the unit, or turn off and on the BLUETOOTH enabled device. Restart of the BLUETOOTH enabled device

may be effective.

• BLUETOOTH enabled devices must support the A2DP profile.

• Because a radio wave interference will occur, this unit may not be used near devices such as a microwave oven or cordless phone which use

the radio wave in the 2.4 GHz range.

• A metallic object near the unit can affect on the radio wave, and BLUETOOTH connection may not be possible.

Check the following if the problem persists after you have confirmed the above.

Cannot connect a BLUETOOTH wireless technology enabled device (PC, smartphone, etc.) to this

unit

• Check if the BLUETOOTH function of the BLUETOOTH enabled device is enabled.

• Initialize the pairing information and perform pairing again.

Firstly delete all the pairing information saved on this unit. In the Home screen, select "Network/Bluetooth" - "Bluetooth" - "Bluetooth Receiver" -

"Pairing Information", then press ENTER while "Clear" is displayed.

Next, delete the pairing information of this unit that is saved on the BLUETOOTH wireless technology enabled device. For information on how to

clear the pairing information, refer to the BLUETOOTH enabled device's instruction manual.

Finally, perform pairing again. Refer to "Playing audio from BLUETOOTH wireless technology enabled devices with this unit" (

→p60

) for

pairing instructions.

(

→p129

)

Cannot connect this unit to a BLUETOOTH wireless technology enabled device (wireless

headphones, etc.)

• Check if the BLUETOOTH function of the BLUETOOTH enabled device is enabled.

• Initialize the pairing information and perform pairing again.

Firstly delete all the pairing information saved on this unit. In the Home screen, select "Network/Bluetooth" - "Bluetooth" - "Bluetooth Transmitter"

- "Pairing Information", then press ENTER while "Clear" is displayed.

Next, delete the pairing information of this unit that is saved on the BLUETOOTH wireless technology enabled device. For information on how to

clear the pairing information, refer to the BLUETOOTH enabled device's instruction manual.

Finally, perform pairing again. Refer to "Transmitting audio from this unit to BLUETOOTH wireless technology enabled devices" (

→p61

) for

pairing instructions.

(

→p130

)

Music playback is unavailable on the unit even after successful BLUETOOTH connection

• When the audio volume of your BLUETOOTH enabled device is set low, the audio may not be played back. Turn up the volume of the

BLUETOOTH enabled device.

• Depending on the BLUETOOTH enabled device, the Send/Receive selector switch may be equipped. Select Send mode.

• Depending on the characteristics or specifications of the BLUETOOTH enabled device, music may not be played back on this unit.

Содержание Elite VSX-LX105









































































































































































Результаты поиска

Содержание Elite VSX-LX105

Отзывы:

Pioneer Elite VSX-LX105, Инструкция по эксплуатации, Страница: 143 / 168

Результаты поиска

Содержание Elite VSX-LX105

Отзывы: