Pioneer Elite VSX-81TXV Скачать руководство пользователя страница 54

Страница: 54 / 84

Other connections

Press CONTROL.

Make sure that any operations for the sub room are done
while

MULTI-ROOM

shows in the display. If

MULTI-

ROOM

is not showing, the front panel controls affect the

main room only.

Use the

MULTI JOG

dial to select the source for the

room you have selected.

For example,

sends the source connected to the

inputs to the sub room.

• If you select

TUNER

, you can use the front panel

TUNER

controls to select a preset station (see

Saving

station presets

on page 31 if you’re unsure how to do

this).

• XM Radio will only be possible in the main room, and

when using the multi-room feature, you can’t use the
iPod and XM Radio functions at the same time.

Use the

MASTER VOLUME

dial to adjust the

volume.

This is only possible if you selected the

VARIABLE

volume control in

Multi-Room and IR receiver setup

page 59.

When you’re finished, press CONTROL again to

return to the main room controls.

You can also press the

MULTI ROOM ON/OFF

button on

the front panel to switch off all output to the sub room.

Multi-room remote controls

The following table shows the possible multi-room
remote controls:

Connecting an IR receiver

If you keep your stereo components in a closed cabinet or
shelving unit, you can use an optional IR receiver (such
as a Niles or Xantech unit) to control your system instead

of the remote sensor on the front panel of this receiver.

You may need to specify your IR receiver type in

Multi-

Room and IR receiver setup

on page 59.

Connect the IR receiver sensor to the MULTI-ROOM

& SOURCE IR IN jack on the rear of this receiver.

Connect the IR IN jack of another component to the

MULTI-ROOM & SOURCE IR OUT jack on the rear of this
receiver to link it to the IR receiver.

Please see the manual supplied with your IR receiver for
the type of cable necessary for the connection.

• If you want to link a Pioneer component to the IR

receiver, see

Operating other Pioneer components

with this unit’s sensor

on page 70 to connect to the

CONTROL

jacks instead of the

IR OUT

jack.

Note

1 The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one room also changes the station in the other room.
Please be careful not to change stations when recording a radio broadcast.
2 The volume levels of the main and sub room are independent.
3 • You won’t be able to switch the main room off completely unless you’ve switched off the multi-room control first.

• If you don’t plan to use the multi-room feature for awhile, turn off the power in both the main and sub room so that this receiver is in standby.

Button

What it does

SHIFT

RECEIVER

Selects the sub room.

Switches power on/off in the sub room.

INPUT
SELECT

Use to select the input source in the sub room.

Input
source
buttons

Use to select the input source directly (this may
not work for some functions) in the sub room.

VOL +/–

Use to set the listening volume in the sub room.

4 • Remote operation may not be possible if direct light from a strong fluorescent lamp is shining on the IR receiver remote sensor window.

• Note that other manufacturers may not use the IR terminology. Refer to the manual that came with your component to check for IR compatibility.
• If using two remote controls (at the same time), the IR receiver’s remote sensor takes priority over the remote sensor on the front panel.

Closet or shelving unit

(Single)

OUT

MONITOR
OUT

12V TRIGGER
(DC OUT 12 V /
50 mA MAX)

ROOM 2(ZONE 2)

OUT

CD-R/TAPE/MD

DVD/LD

DVR/VCR1

DVR/VCR2

TV/SAT