Displays and Controls
32
Remote Control
This page describes the buttons on the remote control used to operate the receiver.
1 Remote Control Display Screen
2 SOURCE
button
Use this button to turn on/off other components.
You must input the preset code in order to use
this function (see page 63).
TV
button
This is a dedicated TV button. Use it to turn on/
off your TV.
3 MULTI CONTROL buttons
These buttons are the basic controls that switch
the mode of the receiver and the remote control,
which allows you to control your other
components.
TV CONT:
Press so that the remote control can
operate the TV control commands.
4 Number buttons
These can be used for many purposes depending
on the mode of the remote control.
When in receiver mode the buttons operate as
below:
DIMMER button (see page 57)
Use to adjust the brightness of the receiver's
display.
LOUDNESS button (see page 52)
Switches the LOUDNESS mode on or off.
TONE button (see page 53)
This button switches between TONE on and off,
which bypasses the tone circuitry.
BASS/TREBLE buttons (see page 53)
Use to select whether the bass or treble will be
adjusted.
(+/–) buttons
Use to adjust the TONE level, effect level,
channel level and sound delay as well as make
Dolby Pro Logic II MUSIC parameter settings.
EFFECT/CH SEL button
Switches between the different channels so you
can add volume individually to each channel with
the + and – buttons. Also selects EFFECT mode,
Dolby Pro Logic II MUSIC parameters (see
page 50) and sound delay settings (see page 53).
You can then use the + and – buttons to make
these adjustments.
SIGNAL SEL button (see page 46)
Press repeatedly to select one of the following:
AUTO –
If there are analog and digital signals
input, the receiver automatically selects the dig-
ital signal.
DIGITAL –
To select an optical or coaxial digital
signal.
ANALOG –
To select an analog signal.
MD/
TAPE2
CD-R/
TAPE1
TUN ER
RECEIVER
VSX-55TXi.book Page 32 Tuesday, April 8, 2003 12:07 AM
