Pioneer Elite VSX-53TX Скачать руководство пользователя страница 102

Страница: 102 / 107

Techno Tidbits and Problem-solving

102

No image is output when a
function is selected.

• Improper connections.

• The input source is not properly

selected.

• The video input selected on the TV moni-

tor is incorrect.

• The TV or monitor is hooked up with cord

that is different than that used for the
video player.

• The component video setting is incor-

rect.

• The MULTI-ROOM is off even though

MULTI-ROOM monitor is connected.

• Make sure the component is con-

nected correctly (see pages 16 and 17).

• Press the correct function button.

• Please read the TV monitor manual

and change the settings accordingly.

• Use the same cable to connect to your

TV and all your video equipment (see
pages 16 and 17).

• Select the correct COMPONENT IN

SELECT setting (see page 82).

• Turn MULTI-ROOM on.

There is no image coming
from the selected component
video jacks.

• The type of cord connected to the TV

doesn't match your video input settings.

• Change the settings to match the cord

connected (see page 16).

Can't record video.

• The source is copy protected.

• You are trying to record a source con-

nected to the component video jacks.

• The recorder's video input is hooked up

using a different type of cord to the
source video output.

• You can't record sources that have

been copy protected.

• Connect the component with S video

or composite video cords (see pages 16
and 17).

• Hook up the source and the recorder

using the same type of video cord. (see
page 17)

The display is dark.

• The display DIMMER button is pushed.

• Press DIMMER on the remote control

repeatedly to return to the default set-
ting (see page 56).

You can't get DIGITAL to come
up when using the SIGNAL
SELECT button.

• Either the digital connections or the DIG-

ITAL IN SELECT is incorrect.

• MULTI CH IN mode is on.

• Make sure the digital connections (see

pages 17 and 22) and the DIGITAL IN
SELECT (see page 81) are done cor-
rectly.

• Turn MULTI CH IN mode off (see

page 53).

The digital format indicator
doesn't light up even when
playing a non-PCM digital
source.

• The player is paused or stopped.
• There is a mistake in the player settings

for audio output.

• Play the source.
• Fix the audio settings (check the man-

ual that came with your DVD player).

A compressed digital source is
being played, but the digital
format indicators don't light
up.

• Although it's a non-PCM digital source

there is a possibility the present track is
not the proper format (5.1, 6.1, or 7.1
channel).

• There is no problem. The indicator

won't light when the track is not a com-
pressed digital source.

During playback of a
compressed digital source, the
PRO LOGIC II or NEO:6
indicators show in the display.

• The digital signal is not being sent with

the source.

• The audio is in two channel format.
• It has already been Dolby surround

encoded.

• Choose DIGITAL or AUTO with the sig-

nal select button (see page 44).

• This is not a malfunction. Check the

manufacturer information for the
source.

During playback of a
Surround EX or DTS ES source
on the AUTO setting, the EX
and ES indicators won't light.

• The source may be 6.1 playback compat-

ible, but there is no signal from the
source to indicate this.

• Switch the SB CH MODE to ON (see

page 54).

During playback of a DVD
audio source, the player
shows a transfer rate of
96kHz, but the receiver does
not.

• The multichannel connections are ana-

log, so there is no digital transfer.

• This is not a malfunction. See the

player's manual for more details.

Cause

Remedy

Input/display

Video

Symptom

00_VSX-53TX.book Page 102 Monday, April 7, 2003 11:07 PM

Содержание Elite VSX-53TX











































































































Результаты поиска

Содержание Elite VSX-53TX

Отзывы:

Похожие инструкции для Elite VSX-53TX

Бренды по названию

Популярные бренды

Pioneer Elite VSX-53TX, Руководство по эксплуатации

Результаты поиска

Содержание Elite VSX-53TX

Отзывы:

Похожие инструкции для Elite VSX-53TX

Бренды по названию

Популярные бренды