Pioneer Elite PDP-S23-LR, Руководство по эксплуатации

Страница: 6 / 18

English
6
SPECIFICATIONS
NOTE:
Specifications and design subject to possible modification
without notice, due to improvements.
Cabinet : Bass-reflex type
Used speakers (two-way system) :
Woofer (for low tones) ............................ Oval cone type
Tweeter (for high tones) ....................... 2 cm dome type
Nominal impedance ..................................................... 8
Ω
Frequency Range ..................................... 60 to 20,000 Hz
Sensitivity ................................ 82 dB/W (at 1 m distance)
Permissible input :
Max. input ............................................................... 13 W
Rated input .............................................................. 4 W
Crossover frequency ................................................ 2 kHz
External Dimensions
PDP-S25-LR (for 50 in. (127 cm))
........................................ 95 (W) x 737 (H) x 62 (D) mm
PDP-S26-LR (for 43 in. (110 cm))
........................................ 95 (W) x 652 (H) x 62 (D) mm
Weight
PDP-S25-LR (for 50 in. (127 cm)) .......................... 1.7 kg
PDP-S26-LR (for 43 in. (110 cm)) .......................... 1.6 kg
Accessory parts (for 2 speakers)
.............................................................. Speaker cable x 2
........................................................ Screw (M5 x 10) x 12
............................................... Bracket for
flush mounting
Right (RIGHT) x 2
Left (LEFT) x 2
................................................... Bracket for air mounting
Right x 1
Left x 1
................................................................ Padding strip x 2
................................................................................ Covers
Upper x 2
Lower x 2
................................................ Operating Instructions x 1
Published by Pioneer Corporation.
Copyright © 2004 Pioneer Corporation.
All rights reserved.
CABINET MAINTENANCE
÷
Use a polishing cloth or dry cloth to wipe off dust and
dirt.
÷
When the cabinet is very dirty, wipe with a soft cloth
moistened with water-diluted cleanser; then wipe again
with a dry cloth. Do not use furniture wax or cleaners.
They may damage the surface of the cabinet.
÷
Never use thinner, benzine, insecticide sprays and other
chemicals on or near the cabinets, since these will cor-
rode the surfaces.
÷
When a chemical cloth is used, read the cautions for the
chemical cloth carefully.
• Organize cables together using the
speed clamps provided with the
plasma display.
Insert
1
into an appropriate hole on the rear of the unit, then
snap
2
into the back of
1
to fix the clamp.
Speed clamps are designed to be difficult to undo once in
place. Please attach carefully.
To remove speed clamps
Using pliers, twist the clamp 90° and pull it outward.
In some cases the clamp may have deteriorated over time
and may be damaged when removed.
1
2
To attach the speed clamps to the main unit
Connect the speed clamps using the 1 hole marked with •
below, depending on the situation.