USB
USB
USB
FL OFF
OPEN/CLOSE
USB
USB
BDP-33FD
LAN
USB
USB
Connecting to the LAN (10/100) terminal
You can enjoy BD-LIVE functions and YouTube videos as well as update this Player’s software by connecting to
the Internet.
When using the Internet, a broadband internet connection as shown below is required.
A separate contract with/payment to an Internet service provider is required to use the Internet.
•
•
•
After connecting
Perform the communication setting. (Page 48)
Load a BD-LIVE compatible disc and play back the contents. (Page 30)
•
•
STEPS
Be sure to turn off this Player and the equipment before making any connections.
Either securely connect a LAN cable (commercially available) to the LAN (10/100) terminal (
and
) or insert
a USB Wireless LAN Adaptor AS-WL100 (sold separately as an option) into the USB port on this Player’s front or
rear panel (
).
1
2
Example of a Broadband Internet Connection
Connections
Front panel of this Player
Rear panel of this Player
21
Connection
CAUTION
Use the Pioneer-designated USB Wireless LAN Adaptor sold separately as an
option. Operation is not guaranteed with other wireless LAN adaptors.
Do not disconnect the USB Wireless LAN Adaptor while the player is
operating.
When using a broadband internet connection, a contract with an internet
service provider is required. For more details, contact your nearest internet
service provider.
Refer to the operation manual of the equipment you have as the connected
equipment and connection method may differ depending on your internet
environment.
Do not use a USB extension cable when connecting a USB memory device
to the USB terminal of the player. Using a USB extension cable may prevent
the player from performing correctly.
•
•
•
•
•
NOTE
Use an Ethernet hub/router supporting 10BASE-T/100BASE-TX.
•
LAN cable
(commercially available)
Internet
Modem
Ethernet hub
(router with hub function)
PC
To LAN (10/100)
terminal
To LAN terminal
To USB port
Enjoying BONUSVIEW or
BD-LIVE
Requires the USB memory device
(commercially available).
The memory device purchased
should comply with USB
specification 2.0 and have
minimum capacity of 1 GB, with
2 GB or more recommended.
•
USB Wireless LAN Adaptor AS-WL100
(sold separately as an option)
or USB memory device
(commercially available)
