Pioneer DVR-RT300-S/UXTLCA, Руководство по обучению

Страница: 45 / 56

2-1: TOP BRACKET (Refer to Fig. 2-1)
1. Extend the 2 supports
1
.
2. Slide the 2 supports
2
and remove the Top Bracket.
NOTE
1. After the installation of the Top Bracket, bend the
support
1
so that the Top Bracket is fixed.
2-2: CASSETTE HOLDER ASSY (Refer to Fig. 2-2)
1. Move the Cassette Holder Assy to the front side.
2. Push the Locker R to remove the Cassette Side R.
3. Remove the Cassette Side L.
NOTE:
1. In case of the Locker R installation, check if the one
position of Fig.2-3-B are correctly locked.
2. When you install the Cassette Side R, be sure to move
the Locker R after installing.
2-4: LINK UNIT (Refer to Fig. 2-4)
1. Set the Link Unit to the Eject position.
2. Unlock the support
1
.
3. Remove the (A) side of the Link Unit first, then remove
the (B) side.
2-5: LINK LEVER/FLAP LEVER (Refer to Fig. 2-5)
1. Extend the support
1
.
2. Remove the Link Lever.
3. Remove the Flap Lever.
Fig. 2-1
Fig. 2-3-B
Fig. 2-4
Fig. 2-5
1
1
1
1
1
1
2
1
2
2
1
Top Bracket
Top Bracket
Main Chassis
Main Chassis
Main Chassis
Locker Spring
Locker R
Locker R
Cassette Side R
Check it this position
is locked.
Cassette Holder
Cassette Side L
Flap Lever
Link Lever
Cassette Side R
Link Unit Cassette Side L
Cassette Side R
Link Unit
Link Unit
(A)
(B)
Main Chassis
Main Chassis
Locker R
Main Chassis
2. REMOVAL OF VCR DECK PARTS
Fig. 2-2
2-3: CASSETTE SIDE L/R (Refer to Fig. 2-3-A)
1. Remove the Locker Spring.
2. Unlock the 4 supports
1
and then remove the Cassette
Side L/R.
3. Unlock the support
2
and then remove the Locker R.
Fig. 2-3-A
45