Pioneer DVR-560H-S, Руководство по обслуживанию

Страница: 77 / 177

60
DVR-660H-K
1 2 3 4
A
B
C
D
E
F
1 2 3 4
Ta b le 6: Output color
Indication Description
YC b Cr4:2:2 Component 12 b its (YC b Cr4:2:2)
YC b Cr4:4:4 Component (YC b Cr4:4:4)
RGB(0-255) RGB full range (0-255)
RGB(16-235) RGB (16-235)
----------- TMDS Off
Ta b le 7: TMDS signal output status
Indication Description
OFF Output: Off
O N Output: On
Ta b le 8 : HDCP
Left side : HDCP Authentication Status
Refer to this item only when HDMI or D V I is displayed for the item for the type of the connected device (Ta b le 5).
If OK is not displayed although HDMI or D V I is displayed, it means that the HDCP authentication failed.
Right side : Check Revocation list
Refer to this item only when HDMI or D V I is displayed for the item for the type of the connected device (Ta b le 5).
When there is also no valid SRM (include Revocation list), "--" is displayed here.
Ta b le 9: Fs
Indication Description
32k 32kHz
44k 44.1kHz
4 8 k 4 8 kHz
4 8 kHz (original data of 96kHz is down-sampled.)
96k 96kHz
96k/2
---
Audio Off
Indication Description
OK
--
OK
--
Indication
If an device supporting HDCP is connected, HDCP authentication is in progress.
HDCP authentication succeeded.
Description
Checking that the connected device (all downstream devices) is not registered to the
Revocation list, or so.
The connected device (all downstream devices) is not registered to the Revocation list.
[Description of the Main screen] (Continued)
Ta b le 4: HDMI audio output status
Indication Description
OFF Output: Off
O N Output: On
Ta b le 5: Type of the connected device
Indication Description
------ N ot connected
HDMI It has b een confirmed that an HDMI device supporting HDCP is connected.
D V I It has b een confirmed that a D V I device supporting HDCP is connected.
When the unit is connected to D V I device (refer to Ta b le 5), the Audio is not outputted.
When the unit is connected to device with no HDCP support, this display is "HDMI-" or "D V I-".