Pioneer DVR-560H-S, Руководство по обслуживанию

Страница: 63 / 177

46
DVR-660H-K
1 2 3 4
A
B
C
D
E
F
1 2 3 4
6.2 ATA/ATAPI DEBUG SCREEN (SECOND SCREEN)
A T A / A T A P I Writer MaintenanceInfo
Power O
N 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 1 0 2 : 5 6 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
D V D 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
R 0 0 5 3 : 4 8 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
W 0 0 2 2 : 1 6 0 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
C D 0 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
R 0 0 3 4 : 0 4 0 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
W 0 0 0 0 : 0 0 0 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0- 0 0
Error log for the Writer
(
N ot for Service)
1
2
3
4
5
Power-on time/cumulative power-on time
Duration of emission of the laser diode (LD) for D V D-R/D V D
while reading
Duration of emission of the LD for D V D-W/D V D while writing
Duration of emission of the LD for CD-R/CD while reading
Duration of emission of the LD for CD-W/CD while writing
(This function is not used for this model.)
To b e used as a rough guide to judge
whether the pickup unit is all right or not
• Dirt on the pickup lens
• Degradation of the laser diodes for
reading CDs and reading/writing to/from
D
V Ds
• While the User Operation display is displayed, press the ESC , DISP , then 2 keys, in that order.
• While any su
b screen of the second screen is displayed, press the DIG/A N A key repeatedly.
The su b screens change cyclically.
[Purposes]
[Tools to be used]
[How to enter]
[How to q uit]
Remote control unit for servicing
(GGF13 8 1)
[How to enter]
[How to q uit]
Aluminum-coated test disc
(GG V 1025)
Update the display b y pressing the SEARCH key while su b screen 3 is displayed. [Procedures]
If the total hours of duration of emission of the laser diode (LD) for D V Ds while reading and that of
emission of the LD for D V Ds while writing exceed 4,700 hours, the LDs may b e degraded.
Perform an LD degradation judgment, using su b screen 4.
Press the ESC key.
Press the ESC key.
• While the User Operation screen is displayed, press the ESC , DISP then 2 keys, then the DIG/A N A
key twice, in that order.
MTTF hours for each LD
D
V D: 4,700 hours
CD: 11,000 hours
The ATA/ATAPI Writer Maintenance Info is o
b tained each time the power is turned on. Thereafter, the
data on the su b screen is updated each time the SEARCH key is pressed (the updating command is
sent) while this su b screen is displayed. Care must b e taken when updating this su b screen, b ecause an
undesired command is inserted if it is executed while recording, etc.
[
N ote on lighting time data for each LD]
Since data on lighting time of each laser diode (LD) are stored in the flash ROM on the MAI N Assy, after
the MAI N Assy is replaced, the data will b e cleared. However, after the LOADER Assy is replaced, data
on lighting time of each LD will b e retained in the MAI N Assy. Therefore, b efore either the MAI N Assy or
LOADER Assy is to b e replaced, it is recommended that you write down the lighting time data.
[Tips]
[1] Writer Maintenance Information of ATA/ATAPI DEBUG OSD (Subscreen 3)