Pioneer DVR-560H-K, Руководство по обслуживанию

Страница: 71 / 192

71
DVR-LX61
5 6 7 8
5 6 7 8
A
B
C
D
E
F
(2) Overview of the dia g nosis items
How to start/terminate the dia g nostic pro g ram
HDD Information
SELF TEST
EXTENDED SELF TEST
HDD Read / Write Check
Use the remote control unit for servicing.
How to start: Press the "ESC", "CX", "0", and "1" keys simultaneously.
How to terminate: Press the "ESC" key.
Do
N OT perform other operations on the unit while the HDD diagnosis is in progress. Although the diagnostic program is
designed to function independently from the unit's functions, an operation on the unit during a diagnosis may cause a
malfunction.
The status of the unit recommended during diagnosis is as follows: All stop, no timer recording (including auto-recording), and
Input selection to L1-L3.
This is a display for checking the HDD information, such as the model name of the
HDD, continuous power-on time, authentication status, and results of the diagnosis on
the end of service life.
This is a simplified diagnosis for the HDD.
A serious failure in the HDD can
b e detected with this test.
Time required for testing: Approx. 60 sec.
This is a reading test across all sectors of the HDD.
Data recorded on the HDD will not
b e erased, b ecause no writing operation is
performed.
Time required for testing: Approx. 2.5 hours/500 GB
1.3 hours/250 GB
This is a writing, reading, and comparing test across all sectors of the HDD.
All data recorded on the HDD will be erased , b ecause all the data are to b e
overwritten. Be sure to obtain your client's consent beforehand.
Time required for testing: Approx. 15 hours/500 GB
8 hours/250 GB
[3] How to Start or Terminate the Dia g nostic Pro g ram
You must redownload Gracenote DB data, b ecause Gracenote DB data are to b e over
written too.