Pioneer DVR-560H-K, Руководство по обслуживанию

Страница: 88 / 192

88
DVR-LX61
1 2 3 4
A
B
C
D
E
F
1 2 3 4
5. When the checksum is correct, enter the Power Adjustment Mode and execute the LD power adjustment.
To enter the Power Adjustment Mode, press [SEARCH] on the remote control unit for service.
Entering the Power Adjustment Mode displays the following screen and opens the tray automatically.
[Power Adjustment Mode]
Close The Tray!
<CLEAR> Exit
6. Close the tray manually to execute the LD power adjustment mode.
You can check the progress of adjustment in the following screen.
[Power Adjustment Mode]
Step Mode : DVD Read Power
<CLEAR> Exit
7. When DVD Disc Judgment is displayed in the Step Mode, the tray opens automatically.
Place DVDT-002 in the tray. The tray closes after 15 seconds from the time it opened.
If the adjustment for DVD disc judgment is completed successfully, CD Disc Judgment is displayed in the Step Mode.
When the tray does not open
•
Check if flexible cables and wire rods are connected properly.
• Errors in the loader, main board, or power source board are
suspected.
Explanation on Step Mode (time needed)
•
DVD Read Power (approx. 10 sec.)
Adjustment of DVD playback power
•
RAM Read Power (approx. 20 sec.)
Adjustment of RAM playback power
•
DVD Write Power (approx. 40 sec.)
Adjustment of DVD recording power
•
CD Read Power (approx. 10 sec.)
Adjustment of CD playback power
•
DVD Disc Judgment (approx. 30 sec.)
Adjustment for DVD disc judgment
•
CD Disc Judgment (approx. 30 sec.)
Adjustment for CD disc judgment
If the adjustment for DVD disc judgment is not completed successfully
•
A disc other than DVDT-002 may have been placed.
Place DVDT-002 in the tray.
8. When CD Disc judgment is displayed in the Step Mode, the tray opens automatically.
Place CDT-313 in the tray. The tray closes after 15 seconds from the time it opened.
If the adjustment for CD disc judgment is completed successfully, the following screen is displayed.
Since the judgment is completed successfully, press [CLEAR] on the remote control unit for service and exit
from the adjustment mode.
[Power Adjustment Mode]
Step Mode : -
Result : OK
<CLEAR> Exit
9. Turn off the power.
If the adjustment for CD disc judgment is not completed successfully
•
A disc other than CDT-313 may have been placed.
Place CDT-313 in the tray.