Pioneer DVR-550HX-S, Руководство по обслуживанию

Страница: 56 / 188

DVR-LX60D
54
1 2 3 4
1 2 3 4
C
D
F
A
B
E
6.4 VR-PLAYBACK-RELATED ERROR LOGS (FIFTH SCREEN)
1
Information on display position
Original / Play list (G/L), Title No., Chapter No. [X:XXX-XX]
Display time (hour, minute, second & frame) [XXhXXmXXsXX]
Logic address for playback (ID) [XXXXXXXX]
Number of entries to error log [XXXXXXXX]
2
Error message log
Original / Play list (G/L), Title No., Time of occurrence (min & sec) [XXX:XXXX]
Location of occurrence (this data is used for development), Name: Name of module where the error
occurred, Line: Number of line where error occurred
Playback-system errors that occurred in 13 times of playback in past [XXX:XXXXXXX]
* For details of error information, refer to the Appendix Table 1.
* If information on errors which occurred on days earlier than the current day is contained on the screen,
the information that follows the information which are displayed with "^" between “Time of occurrence”,
“Name”, “Line” and “Message” indicates the errors that occurred on the current day.
G:001-01 00h00m00s00 00000000
Error=[00000000]
h m s f
Name Line Message
G001-01:00000001 ChgSta 01676 WaiPau Err
L002-01 :00123002 ComInf 00669 DecHdl(14)
L002-01 :00410303 ComInf 00669 DecHdl(40)
G004-01:00000004 ChgSta 01676 WaiPau Err
1
2
It can be inferred that an operation that
caused an error in the drive was
performed or that a failure occurred in
the drive if any of the error logs shown
in "Table 2: Description of
VR-playback-related errors" is recorded
on this screen.
[Purposes] [Tool to be used]
[How to enter]
[How to quit]
(1) Subscreen 1
[Description of each subscreen]
Remote control unit for servicing
(GGF1381)
• For details on error messages, see Table 2 "Description of VR-playback-related errors".
• If a VR-playback-related error is generated, a problem in data reading from the disc may be suspected.
(The possibility of a problem on the drive side is high.)
(2) VR-Playback Error Logs (Subscreen 2)
• While the User Operation display is displayed, press the ESC , DISP , then 5 keys, in that order.
• While any subscreen of the fifth screen is displayed, press the DIG/ANA key repeatedly.
The subscreens change cyclically.
Press the ESC key.
(This subscreen is not for service use.)