Pioneer DVR-520H-S, Руководство по обслуживанию

Страница: 108 / 174

DVR-520H-S
108
1 2 3 4
1 2 3 4
C
D
F
A
B
E
7.1.10 DISASSEMBLY
1
Remove the bonnet case S by removing the eight screws.
2
Press the STANDBY/ON button to turn on the power.
3
Press the
0
OPEN/CLOSE button to open the tray.
4
Remove the tray panel.
5
Press the
0
OPEN/CLOSE button to close the tray.
6
Press the STANDBY/ON button to turn off the power.
Bonnet Case S and Tray panel
1
1
Unhook the four hooks.
2
Remove the front panel section.
Front panel section
2
3
5
4
1
1
1
2
3
1
2
1
3 5
2 6
Tray panel
Front panel section
Tray
Long thin pole
HDD
Aluminum tape
Binder
HDD stay
Emergency eject hole
Jack door
How to open the tray when the power cannot be on
When the player cannot eject disc tray due to power failure or
any other reasons, open the jack door, and use a long thin pole
and push the emergency eject hole under the tray panel to eject.
Bottom view
1
Remove the four screws.
2
Remove the binder.
3
Remove the aluminum tape.
4
Remove the HDD with HDD stay.
HDD Section
3
Diagnosis of the MAIN Assy
Note 1 : Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures
described here are common.
Note 2 : For performing the diagnosis shown below, the following jigs for service are required:
• Jig cable : GGD1370
Front side
1
1
1
4