!
Select
AUX
to watch video of an auxiliary
device as
AUX2
source.
!
Select
CAMERA
to watch a rear view cam-
era video while you are backing your vehi-
cle.
1
Use MULTI-CONTROL to select
VIDEO IN.
Refer to
Adjusting initial settings
on page 48.
2
Press MULTI-CONTROL to select desired
setting.
!
OFF
–
No video component connected
!
TV
–
TV tuner
!
EXT-V
–
External video unit (such as
Pioneer products available in the future)
!
DVD
–
DVD player/multi-DVD player
!
AUX
–
Auxiliary device
!
CAMERA
–
Rear view camera
#
To watch video of
AUX
source, set auxiliary 2
setting on. For details, refer to
Switching the aux-
iliary setting
on the previous page.
#
If AV system display (e.g., AVX-7650) is com-
bined with this unit, connect the rear view cam-
era to the AV system display. For details
concerning connection methods, refer to AV sys-
tem display
’
s instruction manual. Also,
VIDEO IN
setting of this unit need not be
CAMERA
.
Setting for rear view camera (back
up camera)
CAUTION
Pioneer recommends the use of a camera
which outputs mirror reversed images, other-
wise screen image may appear reversed.
You can install a rear view camera onto the AV
input and display a rear view camera video.
When the gear shift is in
REVERSE (R)
posi-
tion, the video automatically switches to a rear
view camera video. (For more details, consult
your dealer.)
!
After you set up the rear view camera set-
ting, move the gear shift in
REVERSE (R)
and confirm if a rear view camera video
can be shown on the display.
!
If the display should be switched to a rear
view camera video by error while you are
driving forward, change the rear view cam-
era setting.
!
When you select
CAMERA
(rear view cam-
era) in
VIDEO IN
, you can select
CAMERA
(rear view camera setting).
1
Use MULTI-CONTROL to select
CAMERA.
Refer to
Adjusting initial settings
on page 48.
2
Press MULTI-CONTROL to select an ap-
propriate setting.
!
BATTERY
–
When the polarity of the con-
nected lead is positive while the gear shift
is in
REVERSE (R)
position
!
GROUND
–
When the polarity of the con-
nected lead is negative while the gear shift
is in
REVERSE (R)
position
Setting the rear output and
subwoofer controller
This unit
’
s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (
FULL
) or subwoofer (
SUB W
)
connection. If you switch the rear output set-
ting to
SUB W
, you can connect a rear speaker
lead directly to a subwoofer without using an
auxiliary amp.
!
When the multi-channel processor (e.g.,
DEQ-P7650) is connected to this unit, you
cannot operate this function.
1
Use MULTI-CONTROL to select REAR SP.
Refer to
Adjusting initial settings
on page 48.
Operating this unit
En
50
Section
02
