2
Press RESET with a pen tip or other
pointed instrument.
RESET
button
3
Replace the front panel by clipping it
into place.
4
Turn the ignition to ACC or ON and
wait for a few seconds.
Resetting of the microprocessor is now com-
pleted.
Use and care of the remote
control
Installing the battery
Slide the tray on the back of the remote con-
trol out and insert the battery with the plus (+)
and minus (
–
) poles aligned properly.
!
When using for the first time, pull out the
film protruding from the tray.
WARNING
Keep the battery out of the reach of children.
Should the battery be swallowed, consult a doc-
tor immediately.
CAUTION
!
Use one
CR2025 (3 V)
lithium battery.
!
Remove the battery if the remote control is not
used for a month or longer.
!
There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
!
Do not handle the battery with metallic tools.
!
Do not store the battery with metallic objects.
!
If the battery leaks, wipe the remote control
completely clean and install a new battery.
!
When disposing of used batteries, comply
with governmental regulations or environmen-
tal public institutions
’
rules that apply in your
country/area.
!
Always check carefully that you are loading
the battery with its plus (+) and minus (
–
)
poles facing the proper directions.
Using the remote control
Point the remote control in the direction of the
front panel to operate.
!
The remote control may not function prop-
erly in direct sunlight.
Important
!
Do not store the remote control in high tem-
peratures or direct sunlight.
!
Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
Before You Start
En
11
Section
01
Before
Y
o
u
Start
