Using the position selector
One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati-
cally adjust the speaker output levels and in-
serts a delay time to match the number and
position of occupied seats. When used in con-
junction with the SFC, the feature will make
the sound image more natural and offer a pa-
noramic sound that envelops you.
1
Press AUDIO to select POSI.
2
Press
c
/
d
/
a
/
b
to select a listening po-
sition.
Press one of these,
c
/
d
/
a
/
b
, to select a lis-
tening position as listed in the table.
Button
Display
Position
c
FRT-L
Front seat left
d
FRT-R
Front seat right
a
FRONT
Front seats
b
ALL
All seats
#
To cancel the selected listening position,
press the same button again.
Note
When you make adjustments to the listening po-
sition, the speaker outputs are automatically set
for appropriate levels. You can tailor the levels
more precisely referring to
Adjusting the speaker
output levels using a test tone
or
Adjusting the
speaker output levels
.
Using the Dolby Pro Logic II
Dolby Pro Logic II creates five full-bandwidth
output channels from two-channel sources to
achieve high-purity matrix surround.
!
If both the center and the rear speakers are
set to
OFF
, you cannot use this function.
!
Dolby Pro Logic II supports up to 48kHz
sampling rate stereo source and has no ef-
fect on other types of source.
1
Press AUDIO to select PLII.
2
Press
c
or
d
to select the desired
mode.
!
MOVIE
–
The Movie mode suitable for
movie playback
!
MUSIC
–
The Music mode suitable for
music playback
!
MATRX
–
The Matrix mode for when FM
radio reception is weak
!
OFF
–
Turn Dolby Pro Logic II off
#
You can adjust the music mode only when
MUSIC
has been selected.
Adjusting the Music mode
You can adjust the Music mode with the fol-
lowing three controls.
You can adjust the music mode only when
MUSIC
has been selected.
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
!
Panorama (
PANO
) extends the front stereo
image to include the surround speakers for
an exciting
“
wraparound
”
effect.
!
Dimension (
DIMENSN
) allows you to gra-
dually adjust the sound field either towards
the front or the rear.
!
Center Width Control (
CENTER
) allows cen-
ter-channel sounds to be positioned be-
tween the center speaker and the left/right
speakers. It improves the left-center-right
stage presentation for both the driver and
the front passenger.
1
Press AUDIO to select adjusting music
mode.
Available accessories
En
70
Section
04
