Other Functions
Setting the level indicator
Level indicators can be changed. Style of the
level indicator differs depending on the
source.
%
Press EQ and hold to select the level in-
dicator.
Press
EQ
and hold repeatedly to switch be-
tween the following settings:
iPod
Progress bar
—
off
—
Level indicator 1
—
Level in-
dicator 2
—
Entertainment
Sources other than iPod
Level indicator 1
—
Level indicator 2
—
Enter-
tainment
—
off
Notes
!
When selecting iPod as a source, the progress
bar is displayed as a default setting. When
sources other than iPod is selected, the level
indicator is displayed as a default setting.
!
When the source is changed from iPod, the
“
progress bar
”
will be changed to the
“
level in-
dicator 1
”
. And then, if the source is changed
to iPod again, the progress bar is displayed.
However, if the level indicator has been chan-
ged, the selected level indicator will be dis-
played even if the source is changed to iPod
again.
!
When Entertainment, Level indicator 1 or
Level indicator 2 is selected on the iPod
source, the selected level indicator will be dis-
played even if the source is changed.
!
When the optical inputs 1 and 2 on DEQ-
P6600 are occupied and AUX is connected to
this unit, the level indicators may be incor-
rectly displayed.
Using the AUX source
This unit can control an auxiliary equipment
such as VCR or portable device (sold sepa-
rately). When connected, auxiliary equipment
is automatically recognized as AUX source
and assigned to
AUX
.
About AUX connection method
You have two methods to connect auxiliary
equipments to this unit.
Mini pin plug cable (
AUX1
)
When connecting auxiliary equipment using a
mini plug cable
iPod and portable audio/video player can be
connected to this unit via mini plug cable.
!
If an iPod with video capabilities is con-
nected to this unit via 3.5 mm plug (4 pole)
cable (e.g., CD-V150M), you can enjoy the
video contents of the iPod.
!
It is possible to connect a portable audio/
video player by using a 3.5 mm plug (4
pole) to RCA cable, which is sold sepa-
rately. However, depending on the cable, re-
verse connection between Red (right side
audio) cable and yellow (video) cable is re-
quired. Otherwise, audio and video may not
be correctly reproduced.
%
Insert the mini plug into the micro-
phone/auxiliary input jack on this unit.
IP-BUS-RCA interconnector (
AUX2
)
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
%
Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner
’
s manual.
#
You can only make this type of connection if
the auxiliary equipment has RCA outputs.
Operating this unit
En
55
Section
03
Operating
this
unit