5
02
English
Section
En
Before you start
About this unit
CAUTION
• Do not allow this unit to come into
contact with liquids. Electrical shock
could result. Also, damage to this unit,
smoke, and overheating could result from
contact with liquids.
•
Keep this manual handy for future
reference.
• Always keep the volume low enough to
hear outside sounds.
• Avoid exposure to moisture.
• If the battery is disconnected or
discharged, any preset memory will be
erased.
Note
Function setting operations are completed
even if the menu is cancelled before the
operations are confirmed.
In case of trouble
Should this product fail to operate properly,
please contact your dealer or nearest
authorized Pioneer Service Station.
Resetting the microprocessor
The microprocessor must be reset in the
following situations:
• Before using this unit for the first time
after installation
• If the unit fails to operate properly
• When strange or incorrect messages
appear on the display
1 Press the (page 6, ) button on the top
right of the front panel to flip down it.
2 Press [RESET] with a pen tip or other
pointed instrument.
Disable the demonstration mode
The demonstration mode should be turned
off as in the following process.
- Press the
SRC
key to turn on this unit.
- Press and hold the
SEL
key to display
SETTING menu.
- Select General menu and then choose
DEMO menu.
- Select Off and then press the center of
Multi Control to set the DEMO mode off.
- Press the
ESC
key to deselect the
SETTING menu.
The demonstration mode is also disabled
automatically by turning ignition key on and
off.
RESET
