DVD-R7783
64
1
2
3
4
1
2
3
4
C
D
F
A
B
E
7.1.9 DISASSEMBLY
Replacement of the Traverse Mechanism and Main Unit-S
Note 1 :
Do NOT look directly into the pickup lens. The laser beam may cause eye injury.
Note 2 :
As the laser driver is mounted on the pickup, no short-circuit switch for the laser diode is provided.
Note 3 :
Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures
described here are common.
Phillips screwdriver
(medium size)
Phillips screwdriver
(small size)
Items to be prepared
Tools to be used
Traverse Mechanism & Main Unit-S (DXX2554)
MAIN Assy
Traverse Mechanism Assy
1
1
2
1
1
1
Remove the four screws.
2
Push the lock lever in to the RELEASE position and slide
the upper cover DR backward until it stops (about 1 cm).
3
Unhook the two hooks by pushing both front sides from the
outside.
4
Remove the upper cover DR.
Note:
When unhooking, care must be taken not to bend the hooks.
They are to be used for reassembly.
Upper cover DR
Hook
Lock lever
-1
2
4
3
3
-2
Upper Cover DR
1
Rear view
Hook
Note:
Be sure to replace both the Traverse Mechanism Assy and
Main Assy when either needs to be replaced. For details,
see "2.4 TRAVERSE MECHANISM & MAIN UNIT-S."
Float Ruber R5
×
4
Note:
The float rubber R5 can be placed either label up.
Содержание DVD-R7783
