DVD-R7783
47
5
6
7
8
5
6
7
8
C
D
F
A
B
E
7.1.5 ACQUISITION OF THE ERROR HISTORY
If "Error Log" is selected and executed, internal information,
such as error logs, is displayed on the screen. This internal
information is also recorded in a file "driven.log," where n is
the drive number.
• Description of error logs
(Up to four error logs are displayed at one time.)
Items
1
Execute Task,
2
Endeco Cmd,
3
Error Code,
4
Error Address, and
5
Error Occurred Time in an error
log tell you the content of the error.
Identify=ff
Aging No.=0x0f Aging pointer=0x00
Controller Cmd=0x07 Controller step=0x03
Host Cmd=0x62
Endeco Cmd=0x04 Error code=0x0b
Execute Task=0x02
Error Address=0x22 0x00 0x00
Error Occurred Time=17h 36min
First check item
1
Execute Task. It tells you with which command for a task an error was generated.
The issued command code is indicated in
2
Endeco Cmd.
Then check item
3
Error Code. It tells you where the error was generated.
In
4
Error Address, the address at which the error was generated is indicated as a Logical Block Address (LBA).
In
5
Error Occurred Time, the accumulated power-on time when the error was generated is indicated.
Note:
Normally a command and error are issued from the same device. However, for a mechanical error during recording, the
command is issued from the CD/DVD encoder, but the error code is issued from the mechanical-control computer.
2
1
4
5
3
1
Execute Task
2
Endeco Cmd
3
Error Code
01h: An error was generated in the Mecha-con.
→
See "Table 1 (P49): Mecha-con Command".
→
See "Table 2 (P49): Mecha-con Error".
02h: An error was generated in the decoder.
→
See "Table 3 (P50): Decoder Command".
→
See "Table 4 (P50): Decoder Error".
04h: An error was generated in the DVD encoder.
→
See "Table 5 (P51): DVD encoder Command".
→
See "Table 6 (P51): DVD encoder Error".
08h: An error was generated in the CD encoder.
→
See "Table 7 (P52): CD encoder Command".
→
See "Table 8 (P52): CD encoder Error".
10h: An error was generated in the controller.
→
See "Table 9 (P53): CD Controller Command".
→
See "Table 10 (P56): Controller Error".
Содержание DVD-R7783
