Pioneer DV-646A Скачать руководство пользователя страница 70

Страница: 70 / 105

DV-646A

7.1.5 TROUBLE SHOOTING

• No Power ON
• FL is not turned ON
• FL indication is unusual

START

Is FL turn on ?

Is tray open ?

Is the indication

of FL normal ?

Do the video and

sound come on ?

Power ON

Yes

Turn on the power again
after 2 - 3 minutes.

• Blow out fuse of the primary side
• Blow out micro-fuse on the POWER SUPPLY Unit. (Check the each voltage.)

(P101 and P102)

• FL controller IC (IC101) on the FLIR Assy is damaged.

• Blow out micro-fuse on the POWER SUPPLY Unit.

(P101 and P102)

FL indication is dark or flickers.

Indicates the error message

Refer to the section "7.1.6 ERROR CODE".

Check the connection between AVJB Assy and DVDM Assy.

Indicate the error message.

• Check the following connections :

POWER SUPPLY Unit - DVDM Assy
DVDM Assy - AVJB Assy
AVJB Assy - FLIR Assy

• Check each voltage (EV+5V, SW+5V, SW+3.3V, +6V and +12V)

(If above voltage are not supplied, check the micro-fuse P101 and P102.)

• Check the following connections :

DVDM Assy - LOAB Assy (5P connector assy)

• Check the voltage of +6V and +12V power supply

(If above voltage is not supplied, check the micro-fuse P101 and P102.)

Spindle

does not turn.

Carriage does

not move.

Yes

Laser diode

does not light.

Focus does

not in.

Yes

• Check the following connections :

DVDM Assy - Spindle motor (12P flexible cable)
DVDM Assy - Stepping motor (4P flexible cable)

• Check the voltage of +6V and +12V power supply

(If above voltage is not supplied, check the micro-fuse P101 and P102.)

• Check the following connection :

DVDM Assy - Pickup Assy (26P flexible cable)

• Check the voltage of +6V and +12V power supply and SW+5V

(If the voltage of +6V and +12V power supply are not supplied,
check the micro-fuse P101 and P102.)

• Check it whether the pickup is defectiveness.

Perform the section "7.1.2 Self-Diagnostic Function of Pickup Defective"
and check the LD current value.

• Short or open the zenner diode

on the POWER SUPPLY Unit.
(D304)

• Check the values of R132 - R134

on the FLIR Assy.

Содержание DV-646A










































































































Результаты поиска

Содержание DV-646A

Отзывы:

Похожие инструкции для DV-646A

Бренды по названию

Популярные бренды

Pioneer DV-646A, Руководство по обслуживанию

Результаты поиска

Содержание DV-646A

Отзывы:

Похожие инструкции для DV-646A

Бренды по названию

Популярные бренды