09
57
En
Cannot play multi-channel
audio.
• Make sure that
Audio Output Mode
is set to
5.1 Channel
(page 46).
• Check that the
Dolby Digital Out
,
DTS Out
and
MPEG Out
settings (page 40) are suitable for your amplifier/receiver — check
the instruction manual that came with your amplifier/receiver.
• DVD-Audio and SACDs do not output multichannel digital audio.
Listen through the player’s analog outputs.
• Check that the settings in the
Speaker Installation
screen are
correct (page 51).
• Check the audio options available from the disc menu.
Cannot listen to
high-sampling rate audio
through the digital output.
• Make sure that
Linear PCM Out
is set to
Down Sample Off
(page 40).
• As a copy-protection measure, some DVDs do not output 96 kHz
audio. In this case, even if set to
Down Sample Off
, the player
automatically outputs the audio at 48 kHz. This is not a malfunction.
Cannot output 192 kHz or
176.4 kHz digital audio.
• The player does not output digital audio at these sampling rates.
The digital output is automatically downsampled.
Cannot output 96 kHz or
88.2 kHz digital audio.
• Check that
Linear PCM Out
is set to
Down Sample Off
(page 40).
• Some discs are digital copy protected and do not output high
sampling rate digital audio. In this case the output is automatically
downsampled.
No DTS audio output.
• If this unit is connected to a non-DTS compatible amplifier or
decoder using a digital audio cable, set
DTS Out
to
DTS
>
PCM
(page 40). If you do not do this, noise will be output when you play a
DTS disc.
• If this unit is connected to a DTS-compatible amplifier or decoder
using a digital audio cable, check the amplifier settings, and that
the cable is properly connected.
Audio mix does not sound
right or sounds incomplete
(for example, inaudible
dialog).
• Make sure that
Audio Output Mode
is set to
2 Channel
if you’ve
connected to the stereo inputs on your amplifier or TV.
Can’t hear effect of Virtual
Surround.
• Virtual Surround does not work with SACD or DVD-Audio.
• The Virtual Surround effect is only output through the
AUDIO OUT (5.1ch) FRONT L/R
analog audio outputs.
• Make sure that
Audio Output Mode
is set to
2 Channel
(page 46).
• The effectiveness of Virtual Surround varies with the disc.
Problem
Remedy
DV49AV_KU_EN.book 57 ページ 2008年6月23日 月曜日 午前11時51分