Connections
02
15
En
English
Connecting the digital output
This player has both optical and coaxial-type
digital audio outputs for connection to an AV
receiver. Connect whichever is convenient.
Depending on the capabilities of your AV
receiver, you might have to set up this player to
output only digital audio in a compatible
format. See
Digital Audio Out settings
on
page 39 and refer to the operating instructions
that came with your AV receiver.
Note that SACD audio is not output through
these jacks, so this connection should be in
addition to, rather than instead of, a 5.1
channel analog connection.
•
Connect one of the DIGITAL AUDIO
OUT jacks on this player to a digital input
on your AV receiver.
DV-600AV only:
For an optical connection, use
an optical cable (not supplied) to connect the
OPTICAL DIGITAL AUDIO OUT
jack to an
optical input on your AV receiver.
For a coaxial connection, use a coaxial cable
(similar to the supplied video cable) to connect
the
COAXIAL DIGITAL AUDIO OUT
jack to a
coaxial input on your AV receiver.
Connecting using HDMI
If you have a HDMI equipped monitor or
display, you can connect it to this player using
a commercially available HDMI cable.
The HDMI connector outputs uncompressed
digital video, as well as almost every kind of
digital audio that the player is compatible with,
including DVD-Video, DVD-Audio (see below
for limitations), SACD, Video CD/Super VCD,
CD, WMA, MP3, MPEG-4, AAC, Divx video and
WMV.
•
Use an HDMI cable to connect the
HDMI OUT interconnect on this player to
an HDMI interconnect on a HDMI-
compatible monitor.
The arrow on the cable connector body should
be face up for correct alignment with the
connector on the player.
DV-600AV
AV CONNECTOR (RGB) TV/AV Receiver
AC IN
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
AV receiver
To coaxial/optical
digital input
P
R
P
B
Y
COMPONENT VIDEO OUT
VIDEO OUT
S-VIDEO OUT
AUDIO OUT (5.1ch)
SL
SR
HDMI OUT
SW
C
L
R
DV-600AV
HDMI-compatible display
To HDMI
interconnect
DV600AV_UK_EN.book 15 ページ ２００７年３月１５日 木曜日 午後５時２０分
