8
X:\print\Pioneer\21_ODM\KB010\INST\KB010_UC_INST(A5_Horizon)\020Chapter_EN.fm
DMH-1770NEX/DMH-1700NEX/DMH-160BT
KB010_UC_INST(A5_Horizon)
En
1
Fit the microphone lead into the
groove.
Microphone lead
Groove
2
Attach the microphone clip to the sun
visor.
Microphone clip
Clamps
Use separately sold clamps to secure
the lead where necessary inside the
vehicle.
Install the microphone on the sun visor
when it is in the up position. It cannot
recognise the driver’s voice if the sun
visor is in the down position.
1
Detach the microphone base from the
microphone clip by sliding the
microphone base while pressing the
tab.
Tab
Microphone base
2
Mount the microphone on the
steering column.
Double-sided tape
Clamps
Use separately sold clamps to secure
the lead where necessary inside the
vehicle.
NOTE
Install the microphone on the steering
column, keeping it away from the steering
wheel.
Mounting on the sun
visor
Installation on the
steering column
The microphone angle can be adjusted.
Adjusting the
microphone angle
_INSTM_DMH1700NEXUC_A_artwork.book Page 8 Tuesday, November 10, 2020 2:12 PM
