Pioneer DJM-T1, Руководство по эксплуатации

Страница: 32 / 100

32
En
Specifications
General
Power requirements ........................... AC 110 V to 120 V or 220 V to 240 V, 50 Hz/60 Hz
Power consumption ...................................................................................................25 W
Power consumption (standby) .................................................................................0.4 W
Main unit weight ...................................................................................................... 6.1 kg
Max. external dimensions ........................... 265 mm (W) x 107.9 mm (H) x 403 mm (D)
Tolerable operating temperature ........................................................... +5 °C to +35 °C
Tolerable operating humidity ..........................................5 % to 85 % (no condensation)
Audio Section
Sampling rate .......................................................................................................... 48 kHz
A/D, D/A converter .................................................................................................. 24 bits
Frequency characteristic
CD ........................................................................................................20 Hz to 20 kHz
S/N ratio (rated output)
PHONO ................................................................................................................92 dB
CD ......................................................................................................................106 dB
MIC ......................................................................................................................84 dB
Total harmonic distortion ( CD — MASTER1 )...................................................... 0.004 %
Standard input level / Input impedance
PHONO .................................................................................................–52 dBu/47 k W
CD .........................................................................................................–12 dBu/47 k
W
MIC .......................................................................................................–52 dBu/47 k W
AUX ......................................................................................................–12 dBu/29 k
W
Standard output level / Load impedance / Output impedance
MASTER1 ......................................................................+6 dBu/10 k
W
/10
W
or lower
MASTER2 .................................................................................. +2 dBu/10 k W /330 W
BOOTH ..........................................................................+6 dBu/10 k
W
/10
W
or lower
PHONES .......................................................................+5.4 dBu/32 W /10 W or lower
Rated output level / Load impedance
MASTER1 ........................................................................................... +24 dBu/10 k W
MASTER2
........................................................................................... +20 dBu/10 k W
Crosstalk ( CD ) ...........................................................................................................86 dB
Channel equalizer characteristic
HI ............................................................................................... –∞ to +6 dB (13 kHz)
MID
.............................................................................................. –∞ to +6 dB (1 kHz)
LOW ............................................................................................ –∞ to +6 dB (70 Hz)
Microphone equalizer characteristic
HI ...................................................................................... –12 dB to +12 dB (10 kHz)
LOW
................................................................................. –12 dB to +12 dB (100 Hz)
Input / Output terminals
PHONO input terminal
RCA pin jack ........................................................................................................2 sets
CD input terminal
RCA pin jack ........................................................................................................2 sets
MIC input terminal
XLR connector/phone jack ( Ø 6.3 mm) .............................................................. 1 set
AUX input terminal
RCA pin jacks ....................................................................................................... 1 set
MASTER output terminal
XLR connector...................................................................................................... 1 set
RCA pin jacks ....................................................................................................... 1 set
BOOTH output terminal
TRS phone jack (
Ø
6.3 mm) ................................................................................. 1 set
PHONES output terminal
Stereo phone jack (
Ø
6.3 mm) ............................................................................ 1 set
USB terminal
B type .................................................................................................................... 1 set
!
The specifications and design of this product are subject to change without
notice.
!
The software screens used in these operating instructions are from the develop-
ment stage and may differ from the actual screens.
!
If you wish to purchase new CONTROL CDs or CONTROL VINYLs when they are
expended or damaged, etc., please contact TRAKTOR SCRATCH retailers or
order them from online shops such as that of Native Instruments (http://www.
native-instruments.com/).
Note that these parts are expendables and not covered by the warranty, even
within the warranty period.
! Be sure to use the [
MASTER1
] terminals only for a balanced output. Connection
with an unbalanced input (such as RCA) using an XLR to RCA converter cable
(or converter adapter), etc., may lower the sound quality and/or result in noise.
For connection with an unbalanced input (such as RCA), use the [ MASTER2 ]
terminals.
! © 2011 PIONEER CORPORATION. All rights reserved.