DJM-909
133
5
6
7
8
5
6
7
8
C
D
F
A
B
E
4. How to rewrite the Display data 2 (rewriting the data in the flash ROM)
1
With the DJM-909's power off, connect the DJM-909 and a PC via the special device, by connecting it to the connector for
rewriting the program for the LCD microcomputer.
2
Turn on the DJM-909.
3
Start up [FLASH.exe.], the software for rewriting, on the PC.
4
Assign "3062FA.INF" to "Device selection Flash memory block information file."
5
Assign 5 sec to "Timeout duration."
6
Assign "Boot mode" to "Mode selection."
7
Click on "Set".
8
If "Set to Boot mode and restart by resetting" is displayed, click on "OK".
9
The rewriting control program is transferred in 5 seconds.
0
When program transfer is finished, the display in the window disappears.
Select "WRITE" at the upper left of the menu bar.
-
After clicking on Reference, select "f_upxxx_02.mot" for "Filename".
=
Assign "00000000" to "Start address."
~
Assign "0001FFFF" to "End address."
!
Assign "0" to "Offset."
@
Click on "OK".
#
The program is transferred in 1 min.
$
When program transfer is finished, the display in the window disappears.
Select File on the menu bar then Exit to exit the program.
%
Turn off the DJM-909.
^
Disconnect the special device from the DJM-909.
&
Turn on the DJM-909.
*
Rewriting of the data in the flash ROM by the LCD microcomputer starts
and is completed in 15 seconds. Nothing is displayed on the LCD.
(
Rewriting is completed when the "BANK 3" LED lights up.
)
Turn off the DJM-909.
Note: Be sure to rewrite the program for the LCD microcomputer after rewriting the data in the flash ROM.
If rewriting of Effect program and Display data 1 are also required along with Display data 2, be sure to rewrite these
first then rewrite the program for the LCD microcomputer.
00000000
0001FFFF
5
6
7
0
8
4
@
-
=
~
!
#
$
9
f_upxxx_02.mot
3062FA.INF
0
• Operating screen
3062FA.INF
3067S,INF
3068F.INF
Содержание DJM 909 - Battle Mixer W/Effects
