1 Press AUDIO to select POSI.
Press
AUDIO
until
POSI
appears in the dis-
play.
2 Press
c
/
d
/
a
/
b
to select a listening po-
sition.
Press one of these,
c
/
d
/
a
/
b
, to select a lis-
tening position as listed in the table.
Button
Display
Position
c
F/L
Front seat left
d
F/R
Front seat right
a
FRT
Front seats
b
ALL
All seats
#
To cancel the selected listening position,
press the same button again.
Note
When you make adjustments for listening posi-
tion, the speakers are automatically set for appro-
priate output levels. You can tailor them if you
want as discussed under the heading of
Adjust-
ing the speaker output levels using a test tone
or
Adjusting the speaker output levels
.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FAD.
Press
AUDIO
until
FAD
appears in the display.
#
If the balance setting has been previously ad-
justed,
BAL
will be displayed.
2 Press
a
or
b
to adjust front/rear speak-
er balance.
Each press of
a
or
b
moves the front/rear
speaker balance towards the front or the rear.
FAD :F25
FAD :R25
is displayed as the front/
rear speaker balance moves from front to rear.
#
FAD : 0
is the proper setting when only two
speakers are used.
3 Press
c
or
d
to adjust left/right speaker
balance.
When you press
c
or
d
,
BAL : 0
is displayed.
Each press of
c
or
d
moves the left/right
speaker balance towards the left or the right.
BAL :L25
BAL :R25
is displayed as the left/
right speaker balance moves from left to
right.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
!
Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Press AUDIO to select SLA.
Press
AUDIO
until
SLA
appears in the display.
3 Press
a
or
b
to adjust the source vo-
lume.
Each press of
a
or
b
increases or decreases
the source volume.
SLA : +4
SLA :
4
is displayed as the source
volume is increased or decreased.
Notes
!
The AM tuner volume level can also be ad-
justed with source level adjustments.
Digital Signal Processor
En
8
Section
03