![background image](http://html.mh-extra.com/html/pioneer/deq-p7650/deq-p7650_operation-manual_328364006.webp)
Introduction of DSP
adjustments
1
2
2
2
By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.
1
Setting the speaker setting
2
Using the position selector
3
Auto TA and EQ (auto-time alignment and auto-
equalizing)
4
Adjusting the time alignment
5
Adjusting the speaker output levels using a
test tone
6
Selecting a cross-over frequency
7
Adjusting the speaker output levels
8
Adjusting 3-band parametric equalizer
1
DSP display
Shows the DSP function names.
2
Subwoofer indicator
Shows when the subwoofer output is turned
on.
%
Press AUDIO to display the DSP func-
tion names.
Press
AUDIO
repeatedly to switch between
the following DSP functions:
POSI
(position selector)
FAD
(balance ad-
justment)
SLA
(source level adjustment)
DRC
(dynamic range control)
DIRECT
(di-
rect)
Lo/Ro
(down mix)
#
When selecting the FM tuner as the source,
you cannot switch to
SLA
,
DRC
.
#
When playing other than the DVD disc, you
cannot switch to
DRC
.
#
To return to the display of each source, press
BAND/ESC
.
Note
If you do not operate the DSP function within
about 30 seconds, the display is automatically re-
turned to the source display.
Digital Signal Processor
En
6
Section
03