Listening to SIRIUS Satellite
Radio
5
5
5
2
2
2
2
1
1
1
1
3
3
3
3
4
4
4
4
This unit can control a SIRIUS Satellite Radio
tuner (sold separately).
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIR-
IUS operation manual.
!
With this unit, you can operate one addi-
tional function: SIRIUS channel direct se-
lection. Refer to
Selecting a SIRIUS channel
directly
on this page.
1
SIRIUS band indicator
Shows the SIRIUS band which has been
selected.
2
SIRIUS preset number indicator
Shows what SIRIUS preset has been
selected.
3
SIRIUS channel select setting indicator
Shows what channel select setting has
been selected.
CH
is displayed when
Channel number
is selected, and
CAT
is
displayed when
Category
is selected.
4
SIRIUS channel number indicator
Shows to which SIRIUS channel number
the tuner is tuned.
5
SIRIUS channel name
Shows the channel name of broadcast
channel.
1
Press SOURCE to select SIRIUS.
Press
SOURCE
until you see
SIRIUS
displayed.
2
Press BAND to select a SIRIUS band.
Press
BAND
repeatedly until the desired SIR-
IUS band is displayed,
SR-1
,
SR-2
or
SR-3
.
3
To perform tuning, push
MULTI-CONTROL left or right.
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
#
If you push and hold
MULTI-CONTROL
left or
right, you can increase or decrease channel num-
ber continuously.
#
You can also perform tuning from a desired
channel category. (Refer to
Selecting a channel in
the channel category
on page 72.)
Note
It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to SIRIUS tuner or select a channel.
Selecting a SIRIUS channel
directly
You can select a SIRIUS channel directly by
entering the desired channel number.
1
Press DIRECT on the remote control.
CHANNEL INPUT
appears in the display.
2
Use 0
–
9 on the remote control to input
the desired channel number.
#
To cancel the input numbers, press
CLEAR
on
the remote control.
3
While the input number is displayed,
press DIRECT on the remote control.
The entered SIRIUS channel is selected.
SIRIUS Satellite Radio tuner
En
70
Section
12