08
Section
Notes
• Even if you change this setting, there is no
output unless you switch the non fading out-
put (refer to page 41) or subwoofer output
(refer to page 40) in the Audio Menu on.
• If you change the subwoofer controller, sub-
woofer output and non fading output in the
Audio Menu return to the factory settings.
1 Press
OPEN
to open the front panel.
2 Press
FUNCTION
to select
SW
.
Press
FUNCTION
until
SW
appears in the dis-
play.
3 Change the rear output setting with
5
/
∞
.
Pressing
5
/
∞
will switch between
Rear SP
:FULL
(full-range speaker) and
Rear SP:S.W
(subwoofer) and that status will be displayed.
Notes
• When no subwoofer is connected to the rear
output, select
Rear SP:FULL
.
• When a subwoofer is connected to the rear
output, set for subwoofer
Rear SP:S.W
.
• When the rear output setting is
Rear SP:S.W
,
you cannot change the subwoofer controller.
4 Change the subwoofer controller with
2
/
3
.
Pressing
2
/
3
will switch between
S.W Control:INT
and
S.W Control:EXT
and that
status will be displayed.
Switching the Telephone
Muting/Attenuation
Sound from this system is muted or attenuated
automatically when a call is mode or received
using a cellular telephone connected to this
product.
1 Press
OPEN
to open the front panel.
2 Press
FUNCTION
to select
TEL
.
Press
FUNCTION
until
TEL
appears in the dis-
play.
3 Switch the telephone muting/attenuation
with
2
/
3
.
Pressing
2
/
3
will switch between
Telephone
:ATT
(attenuation) and
Telephone :MUTE
(mut-
ing) and that status will be displayed.
Switching the motion screen
You can switch on/off the moving source icon
display. When off is selected, the moving source
icon disappears after opening screen is dis-
played.
1 Press
OPEN
to open the front panel.
2 Press
FUNCTION
to select
DISP
.
Press
FUNCTION
until
DISP
appears in the
display.
3 Switch
DISP
on or off with
5
/
∞
.
Pressing
5
/
∞
will switch
Motion
between on
and off and that status will be displayed (e.g.,
Motion :ON
).
Initial Settings
En
46