Pioneer DEH-P8450MP, Руководство по эксплуатации

Страница: 40 / 112

Audio Adjustments
4 Press
5
or
∞
to adjust the treble level.
Each press of
5
or
∞
increases or decreases
the treble level.
+6
–
–6
is displayed as the level
is increased or decreased.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press
OPEN
to open the front panel.
2 Press
AUDIO
to select
Loud
.
Press
AUDIO
until
Loud
appears in the display.
3 Press
5
to turn loudness on.
Loudness level (e.g.,
Loud Mid
) appears in the
display.
4 Press
2
or
3
to select the level.
Press
2
or
3
until the desired level appears in
the display.
Low
(low)—
Mid
(mid)—
High
(high)
5 Press
∞
to turn loudness off.
Loud OFF
appears in the display.
Using subwoofer output
This unit is equipped with a subwoofer output
which can be switched on or off.
1 Press
OPEN
to open the front panel.
2 Press
AUDIO
to select
Sub-W1
.
When the subwoofer controller setting is
S.W
Control:EXT
, you can select
Sub-W1
. Press
AUDIO
until
Sub-W1
appears in the display.
3 Press
5
to turn subwoofer output on.
Sub-W1 Normal
appears in the display.
Subwoofer output is now on.
• You can turn off subwoofer output by pressing
∞
.
4 Press
2
or
3
to select the phase of sub-
woofer output.
Press
2
to select reverse phase and
Rev.
appears in the display. Press
3
to select normal
phase and
Normal
appears in the display.
Adjusting subwoofer settings
When the subwoofer output is on, you can
adjust the cut-off frequency and the output level
of the subwoofer.
1 Press
OPEN
to open the front panel.
2 Press
AUDIO
to select
Sub-W2
.
When the subwoofer output is on, you can
select
Sub-W2
. Press
AUDIO
until
Sub-W2 80
(Hz) appears in the display.
• If the subwoofer setting has been previously
adjusted, the frequency of that previously
selected will be displayed, such as
50
(Hz) or
125
(Hz).
3 Press
2
or
3
to select cut-off frequency.
Press
2
or
3
until the desired cut-off frequency
appears in the display.
50
—
80
—
125
(Hz)
• Only frequencies lower than those in the
selected range are output from the subwoofer.
4 Press
5
or
∞
to adjust the output level of
the subwoofer.
Each press of
5
or
∞
increases or decreases
the level of the subwoofer.
+6
–
–6
is displayed
as the level is increased or decreased.
Press
5
or
∞
until you see the desired value
displayed.
En
40
07
Section