Black plate (13,1)
!
AUX1 is set to on by default. Turn off the AUX1
when not in use (refer to
Switching the auxili-
ary setting
on page 29).
!
Charging the portable audio player using
car
’
s DC power source while connecting it to
AUX input may generate noise. In this case,
stop charging.
!
External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
!
When this unit
’
s blue/white lead is connected
to the vehicle
’
s auto-antenna relay control
terminal, the vehicle
’
s antenna extends when
this unit
’
s source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
%
Turn MULTI-CONTROL to adjust the
sound level.
Tuner
Basic Operations
%
Select a band
Press
BAND/ESC
.
#
Band can be selected from among
FM1
,
FM2
,
FM3
or
AM
.
%
Manual tuning (step by step)
Push
MULTI-CONTROL
left or right.
%
Seek tuning
Push and hold
MULTI-CONTROL
left or right,
and then release.
#
You can cancel seek tuning by pushing
MULTI-CONTROL
left or right.
#
While pushing and holding
MULTI-CONTROL
left or right, you can skip stations. Seek tuning
starts as soon as you release
MULTI-CONTROL
.
Storing and recalling broadcast
frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
!
Six stations for each band can be stored in
memory.
1
Press LIST.
Preset screen is displayed.
2
Use MULTI-CONTROL to store the se-
lected frequency in memory.
Turn to change the preset number. Press and
hold to store.
#
You can also store the frequency in memory
by pushing and holding
MULTI-CONTROL
right.
3
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
#
To return to the ordinary display, press
BAND/ESC
or
LIST
.
#
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
<YRD5265-A/S>13
Operating this unit
En
13
English
Section
02