3 Press
c
or
d
to select the phase of sub-
woofer output.
Press
c
to select reverse phase and
REV
ap-
pears in the display. Press
d
to select normal
phase and
NOR
appears in the display.
Adjusting subwoofer settings
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
1 Press SW to select 80: 0.
Press
SW
until
80: 0
appears in the display.
#
You can also select the subwoofer setting
menu by pressing
AUDIO
on the unit.
#
When the subwoofer output is on, you can se-
lect
80: 0
.
#
If the subwoofer setting has been previously
adjusted, the frequency of that previously se-
lected will be displayed instead of
80
.
2 Press
c
or
d
to select cut-off frequency.
Each press of
c
or
d
selects cut-off frequen-
cies in the following order:
50
63
80
100
125
(Hz)
Only frequencies lower than those in the se-
lected range are outputted from the subwoo-
fer.
3 Press
a
or
b
to adjust the output level
of the subwoofer.
Each press of
a
or
b
increases or decreases
the level of the subwoofer.
+6
24
is dis-
played as the level is increased or
decreased.
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn on the
HPF (high pass filter). Only frequencies higher
than those in the selected range are outputted
from the front or rear speakers.
1 Press AUDIO to select HPF.
Press
AUDIO
until
HPF
appears in the display.
2 Press
a
to turn high pass filter on.
HPF : 80
appears in the display. High pass fil-
ter is now on.
#
If the high pass filter has been previously ad-
justed, the frequency of that previously selected
will be displayed instead of
HPF : 80
.
#
To turn high pass filter off, press
b
.
3 Press
c
or
d
to select cut-off frequency.
Each press of
c
or
d
selects cut-off frequen-
cies in the following order:
50
63
80
100
125
(Hz)
Only frequencies higher than those in the se-
lected range are outputted from the front or
rear speakers.
Boosting the bass
Bass boost function boosts the bass level of
sound lower than 100 Hz. The more the bass
level is increased, the more the bass sound is
emphasized and the entire sound becomes
powerful. When using this function with the
subwoofer, the sound under the cut-off fre-
quency is boosted.
1 Press AUDIO to select BASS.
Press
AUDIO
until
BASS
appears in the dis-
play.
#
You can also select the bass boost setting by
pressing and holding
SW
.
2 Press
a
or
b
to select a desired level.
0
6
is displayed as the level is increased or
decreased.
Audio Adjustments
En
33
English
Section
08
