Note
If you turn random play on during
DSC
and then
return to the playback display,
DRDM
appears in
the display.
Scanning CDs and tracks
While you are using
DSC
, the beginning of
each track on the selected disc plays for about
10 seconds. When you are using
MCD
, the be-
ginning of the first track of each disc is played
for about 10 seconds.
1 Select the repeat range.
Refer to
Repeating play
on the previous page.
2 Press FUNCTION to select SCAN.
Press
FUNCTION
until
SCAN
appears in the
display.
3 Press
a
to turn scan play on.
SCAN :ON
appears in the display. The first 10
seconds of each track of the current disc (or
the first track of each disc) is played.
4 When you find the desired track (or
disc) press
b
to turn scan play off.
SCAN :OFF
appears in the display. The track
(or disc) will continue to play.
#
If the display has automatically returned to
the playback display, select
SCAN
again by press-
ing
FUNCTION
.
Notes
!
After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
!
If you turn scan play on during
DSC
and then
return to the playback display,
DSCN
appears
in the display.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
1 Press FUNCTION to select PAUSE.
Press
FUNCTION
until
PAUSE
appears in the
display.
2 Press
a
to turn pause on.
PAUSE:ON
appears in the display. Play of the
current track pauses.
3 Press
b
to turn pause off.
PAUSE:OFF
appears in the display. Play will re-
sume at the same point that you turned pause
on.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
1 Play a CD that you want to program.
Press
a
or
b
to select the CD.
2 Press FUNCTION and hold until TITLE IN
appears in the display, then press
FUNCTION to select ITS.
After
TITLE IN
is displayed, press
FUNCTION
repeatedly, the following functions appear in
the display:
Multi-CD Player
En
26
Section
07
