Frequency
Low:
40HZ
—
80HZ
—
100HZ
—
160HZ
Mid:
200HZ
—
500HZ
—
1KHZ
—
2KHZ
High:
3KHZ
—
8KHZ
—
10KHZ
—
12KHZ
Q factor
2N
—
1N
—
1W
—
2W
#
You can also perform the same operations by
pushing
MULTI-CONTROL
up or down.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Use MULTI-CONTROL to select
LOUDNESS.
2
Press MULTI-CONTROL to display the
setting mode.
3
Use MULTI-CONTROL to select the de-
sired setting.
Turn to change the setting.
LOW
(low)
—
MID
(mid)
—
HIGH
(high)
—
OFF
(off)
#
You can also perform the same operations by
pushing
MULTI-CONTROL
up or down.
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
Also, phase can be selected between normal
and reverse.
1
Press SW to display the subwoofer set-
ting mode.
Press
SW
repeatedly to switch between the
subwoofer setting modes in the following
order.
SW SETTING 1
(subwoofer on/off setting) set-
ting mode
—
SW SETTING 2
(subwoofer set-
ting) setting mode
2
Select SW SETTING 1 setting mode.
3
Turn MULTI-CONTROL to select the de-
sired setting.
NORMAL
(normal phase)
—
REV
(reverse
phase)
—
OFF
(subwoofer off)
#
You can also perform the same operations by
pushing
MULTI-CONTROL
up or down.
Note
You can also switch to this setting mode in the
menu that appears by using
MULTI-CONTROL
.
Adjusting subwoofer settings
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
!
When the subwoofer output is on, you can
select
SW SETTING 2
.
1
Press SW to display the subwoofer set-
ting mode.
Press
SW
repeatedly to switch between the
subwoofer setting modes in the following
order.
SW SETTING 1
(subwoofer on/off setting) set-
ting mode
—
SW SETTING 2
(subwoofer set-
ting) setting mode
2
Select SW SETTING 2 setting mode.
3
Press MULTI-CONTROL to select the seg-
ment you wish to set.
Press
MULTI-CONTROL
repeatedly to switch
the segment in the following order:
Cut off frequency
—
Level
4
Turn MULTI-CONTROL to adjust the se-
lected segement.
Cut off frequency
50HZ
—
63HZ
—
80HZ
—
100HZ
—
125HZ
Level
+6
to
–
24
is displayed as the level is increased
or decreased.
#
You can also perform the same operations by
pushing
MULTI-CONTROL
up or down.
Audio Adjustments
En
20
Section
03