Pioneer DDJ-ERGO-v, Руководство по обслуживанию

Страница: 6 / 98

6
DDJ-ERGO-V
1 2 3 4
A
B
C
D
E
F
1 2 3 4
3. BASIC ITEMS FOR SERVICE
3.1 CHECK POINTS AFTER SERVICING
3.2 JIGS LIST
Items to be checked after servicing
To keep the product quality after servicing, confirm recommended check points shown below.
No. Procedures Check points
1
Confirm that the customer complaint has been resolved.
If the problem pointed out by the customer occurs with a specific
source or operation, such as PC input, AUX/MIC input, Fader, or
V olume, input that specific source then perform that specific
operation for checking.
The customer complain must not be reappeared.
Audio and operations must be normal.
2
Confirmation of operation of operating elements
Enter Service mode. There must be no errors in operations of each button, Rotary
selector,
V olume, Fader, Slider and JOG.
3
Check the analog audio output.
Connect this unit with a PC with the DJ application (
V irtual DJ LE)
installed, via USB, then operate the DJ application ( V irtual DJ LE).
There must be no errors, such as noise, in audio signals and
operations of the MASTER/HEADPHO
N ES outputs.
4
Check the analog audio input.
Input an audio signal via AUX/MIC.
Audio and operations must be normal.
5 Check the appearance of the product. N o scratches or dirt on its appearance after receiving it for service.
Item to be checked regarding audio
Distortion
N oise
V olume too low
V olume too high
V olume fluctuating
Sound interrupted
See the table below for the items to be checked regarding audio.
Lubricants and Glues List
Name Part No. Remarks
Lubricating oil GYA1001 Refer to “9.4 JOG SECTIO N ”.
Jigs List
Jig Name Part No.
Purpose of use / Remarks
USB cable GGP1193 for PC connection