Pioneer Blade HPR-09A2, Руководство пользователя

Страница: 9 / 23

Installation batteries
1. Press down on the back of the
remote control as shown in the
image to the right. Push out the
cover of the battery box in the
direction of the arrow.
2. Install two AAA batteries.
3. Reinstall the cover of the battery
box.
Battery lid switch
Operation guide
1. After connecting the power, press “ ” button on the remote controller to turn
on the air conditioner.
2. Press “ ” button to select your required mode: Auto, Cooling, Dry, Fan, Heating.
3. Press “ ” or “ ” button to set your required temperature. (Please note that the
temperature can’t be adjusted in auto mode).
4. Press “ ” button to set your required fan speed: Auto, Fan1, Fan2, Fan3,
Fan4, Fan5, Turbo, Stepless speed.
5. Press “ ” or “ ” button to select fan blowing angle.
Note:
● During operation, point the remote control at the signal receiver on the
indoor unit.
● Keep the distance between the remote control and the receiving window to eight
metres or less. There should be no obstacles in the way.
● Keep your remote control close to the unit during operation. Be aware that
the signal may be affected by fluorescent lamps or wireless telephones.
● If you won’t be using the remote control for a long time, please take out the batteries.
● If the display on the remote controller is fuzzy or there’s no display, please
replace batteries.