Pioneer Blade HPR-09A2, Руководство пользователя

Страница: 21 / 23

Problem Solving
Problem Possible cause Possible solution
Mist emits from
indoor unit’s air
outlet. Indoor temperature and humidity
is high? When very humid indoor air is
cooled rapidly, mist may appear.
After running your unit for a
while
the indoor temperature and
humidity will decrease and mist will
disperse.
Set temperature
can’t be
adjusted
Unit is operating under auto
mode? Temperature can’t be adjusted
under auto mode. Please switch
the operation mode if you need
to
adjust temperature.
Your required temperature
exceeds the temperature range? Set temperature range:16°C~31°C
Cooling (heating)
effect isn’t working
properly Voltage is too low? Wait until the voltage resumes
normal.
The filter may be dirty. Clean the filter. See page xx
Is the temperature set within the
proper range? Adjust temperature to proper
range: 16°C~31°C
Doors and windows could be
open. Close doors and windows.
You can smell an
odour Check the room for other
sources of the odour first. Clean the filter.
Eliminate the odour source.
Air conditioner
operates
normally suddenly
Whether there’s interference,
such as thunder, wireless
device,etc.
Disconnect power, put back
power, and then turn on the unit
again.
You notice the
outdoor unit has
vapour coming out
of it. The heating mode may be
turned on. It is normal for the unit to emit
vapour during defrosting in heating
mode.
You hear a “Water
flowing” noise. Air conditioner has just been
turned off or on? It’s normal to hear a noise like this
at start up or when you turn the
unit off. The noise is the sound of
refrigerant circulating inside.
Cracking noise When the air conditioner has just
been turned on or off. This is the sound of friction
caused by expansion and/or
contraction of panels or other
parts due to the change in
temperature.