43
En
06
Note
• Items that cannot be changed are indicated in gray. The items that can be selected depend on the player’s status.
• In Options, the factory default settings are indicated in bold.
Setting
Options
Explanation
V
ide
o Ou
t
TV Aspect Ratio
16:9 (Widescreen)
Select this when connected to a wide (16:9) TV.
4:3 (Standard)
Select this when connected to a conventional TV.
4:3 Video Out
Full
4:3 pictures are displayed over the entire screen.
Normal
4:3 pictures are displayed with vertical black bars along the sides. Select this when you
cannot switch the aspect ratio to 4:3 on the TV.
4:3 Video Out
is only valid when
TV Aspect Ratio
is set to
16:9 (Widescreen)
.
DVD 16:9 Video Out
Letter Box
16:9 pictures are displayed with black bars at the top and bottom when viewing on a 4:3
screen.
Pan & Scan
The picture is displayed over the entire screen, with the left and right sides of the 16:9
picture cropped. Select this to view 4:3 pictures over the entire screen. For some discs, the
picture will be displayed in the
Letter Box
mode even if
Pan & Scan
is set.
•
DVD 16:9 Video Out
is only valid when
TV Aspect Ratio
is set to
4:3 (Standard)
.
•
DVD 16:9 Video Out
is only valid when playing 16:9 pictures of DVD-Video discs. When other 16:9 pictures are played, they are output in the
Letter Box
mode.
NTSC on PAL TV
On
Select this when connected to a PAL-only TV. The picture is displayed correctly on the PAL-
only TV even when playing a source with a frame/field rate other than 50 Hz.
Off
Select this when connected to an NTSC-compatible TV.
Many recent PAL TVs support the input of NTSC signals, in which case this can be set to
Off
. Also check your TV’s operating instructions.
Au
di
o
O
u
t
Output Terminal
HDMI MAIN
Select this to output audio signals from the
HDMI OUT (MAIN)
terminal.
DIGITAL AUDIO
Select this to output audio signals from the
DIGITAL OUT
terminals.
ANALOG AUDIO
Select this to output audio signals from the
AUDIO OUT (7.1 ch)
terminals.
• The optimum audio signals for the audio format and the player’s settings are output from the output terminal(s) set here.
• When
HDMI MAIN
or
DIGITAL AUDIO
is selected at
Output Terminal
, linear PCM audio signals (2 channels) are output from all terminals other than
the ones selected at
Output Terminal
.
• When
ANALOG AUDIO
is selected at
Output Terminal
, no audio signals are output from the
HDMI OUT
or
DIGITAL OUT
terminals.
• To listen to the device connected to the
HDMI OUT (SUB)
terminal, select
HDMI MAIN
and turn off the power of the device connected to the
HDMI
OUT (MAIN)
terminal.
Dolby Digital Out
* Only valid for the
DIGITAL OUT
terminals.
Dolby Digital 1
Dolby Digital audio signals are output. With BD-ROMs, the secondary audio and interactive
audio are mixed for output.
Dolby Digital 2
Dolby Digital audio signals are output. With BD-ROMs, the signals are output without
mixing the secondary audio and interactive audio signals.
Dolby Digital
PCM
Select this when the connected AV receiver or amplifier, etc., is not compatible with Dolby
Digital audio signals. The Dolby Digital audio signals are converted into linear PCM audio
signals for output.
DTS Out
* Only valid for the
DIGITAL OUT
terminals.
DTS 1
DTS Digital Surround audio signals are output. With BD-ROMs, the secondary audio and
interactive audio are mixed for output.
DTS 2
DTS Digital Surround audio signals are output. With BD-ROMs, the signals are output
without mixing the secondary audio and interactive audio signals.
DTS
PCM
Select this when the connected AV receiver or amplifier, etc., is not compatible with DTS
Digital Surround audio signals. The DTS Digital Surround audio signals are converted into
linear PCM audio signals for output.
AAC Out
* Only valid for the
DIGITAL OUT
terminals.
AAC
Select this when the connected AV receiver or amplifier, etc., is compatible with AAC audio
signals. The AAC audio signals are output.
AAC
PCM
Select this when the connected AV receiver or amplifier, etc., is not compatible with AAC
audio signals. The AAC audio signals are converted into linear PCM audio signals for
output.
DTS Downmix
Stereo
DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital
Surround audio signals converted to linear PCM audio signals are converted into 2-channel
(stereo) signals for output.
Lt/Rt
DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital
Surround audio signals converted to linear PCM audio signals are converted into 2-channel
signals compatible with Dolby Surround for output (when the connected AV receiver or
amplifier, etc., is compatible with Dolby Pro Logic, the AV receiver or amplifier outputs the
linear PCM audio signals as surround audio signals).
