25
En
03
About Film material
The film material is a video signal with a frame rate of 24 frames/
second. For example, these materials include 1080/24p, 720/24p,
etc.
To output film material
To output 1080/24p film material from
HDMI OUT
terminals, set the
output video resolution to either
Auto
,
1080/24p
or
Source Direct
.
Caution
• 1080/24p signals can only be output from the
HDMI OUT
terminals. They cannot be output from other video terminals.
• When
Auto
is selected, the picture is output at 60 frames/
second if your TV is not compatible with 1080/24p signals.
• When
1080/24p
or
Source Direct
is selected, the signals are
output as such, even if your TV is not compatible with 1080/24p
signals. If the picture is not displayed properly, use
OUTPUT
RESOLUTION
to set an output video resolution at which the
video and audio signals are properly output.
• Even if
Auto
,
1080/24p
or
Source Direct
is selected, 720/24p
video signals are output at 60 frames/second.
• When
1080/24p
is selected, the motion may be unnatural or the
picture may not be clear, depending on the source. In this case,
set the resolution to something other than
1080/24p
.
About the output video resolution
The resolution setting and the resolution of the picture that is actually output differ for the different terminals. See the table below.
The table below shows the output video resolution for the different terminals when the frame/field frequency of the playback source is 50 Hz
on the upper line, the resolutions when the source’s frame/field frequency is 60 Hz and 24 Hz on the lower line.
Auto
Output Video Resolution
Source :
1
0
8
0/24p
Current Output :
1
0
8
0/24p
Video resolution of the
currently playing disc
Output video resolution
from the player
Example:
Output video
resolution
setting
HDMI MAIN, HDMI SUB
1
1. The video output terminal set at
Video
in the
Setup Navigator
(page 20) or the video output terminal selected with
VIDEO SELECT
(page 24).
COMPONENT/S/VIDEO
1
—
HDMI OUT terminals
COMPONENT VIDEO
output terminals
2
2. Depending on the BD, the pictures may not be output.
HDMI OUT terminals
COMPONENT VIDEO
output terminals
2
S-VIDEO/
VIDEO output
terminal
2
(TV system)
Auto
3
3. This cannot be selected when the video output terminal is set to
COMPONENT/S/VIDEO
.
Resolution preferred by
TV
4,5
4. The pictures are output with the preferred output resolution of the device (TV, AV receiver or amplifier, etc.) connected to the selected video output terminal.
However, if devices are connected to both
HDMI MAIN
and
HDMI SUB
, the pictures are output with a resolution which both devices support. If the devices
connected to
HDMI MAIN
and
HDMI SUB
support different resolutions, turn off the power of the device not being used so that the picture is output with the
optimum resolution for the device to be viewed.
5. For details on the output of film material (1080/24p or 720/24p video signals), see
To output film material
on page 25.
576/50i
480/60i
—
—
576/50i
480/60i
PAL
6
6. Depends on the
NTSC on PAL TV
setting (page 43).
576i or 480i
576/50i
576/50i
576/50i
480/60i
480/60i
480/60i
576p or 480p
576/50p
576/50p
576/50p
480/60p
480/60p
480/60p
720p
720/50p
576/50p
576/50p
720/60p
720/60p
720/60p
7
7. DVD-Video or DVD VR format may be output at 480/60p. BDs format may be output at 480/60p. At this time, the video signals from the
HDMI OUT
terminals are
output at the same resolution of 480/60p as the video signals output from the
COMPONENT VIDEO
terminals.
1080i
1080/50i
576/50p
576/50p
1080/60i
1080/60i
1080/60i
7
1080p
3
1080/50p
8
8. Depending on the connected HDMI cable, the video signals may not be output.
—
—
1080/60p
8
1080/24p
3
1080/50i
—
—
1080/24p
5,9,10
9. Depending on the connected TV, the video signals may not be output.
10. Sources recorded in 480/60p, 720/60p or 720/24p are output at 1080/60i.
Source Direct
Resolution recorded on
disc
5,9,11
11. 720/24p film material is output at 720/60p.
Resolution recorded on
disc
9,11,12
12. 1080/24p film material is output at 1080/60i.
Resolution recorded on
disc
9,11,12