05
40
En
•
Black Setup
has the effect only for pictures output from the
VIDEO
and
S-VIDEO
output terminals, and for NTSC signals
output.
• The items below do not apply to video signals output from the
VIDEO
and
S-VIDEO
output terminals, nor to 480i/576i video
signals output from the
COMPONENT VIDEO
output terminal
(except when the
Output Video Resolution
is set to 480i/576i
(page 24)).
–
Sharpness High
–
Sharpness Mid
–
Detail
–
White Level
–
Black Level
–
Gamma Correction
–
Hue
–
Chroma Level
Closing the Video Adjust screen
Press
HOME MENU
.
About Pure Cinema
There are two types of video signals:
•
Video material
– Video signals recorded at 25 or 30 frames/
second
•
Film material
– Video signals recorded at 24 frames/second
“Pure Cinema” uses signal processing suited for “film material”
when converting 576i/480i or 1080i interlaced video signals into
progressive video signals, resulting in clear picture reproduction
without losing the quality of the material.
is displayed on the disc information screen when playing the
“film material” pictures of BD-ROM, BD-R/-RE and DVD-Video discs
(page 29).
Adjusting the audio
Adjusting the Audio DRC
Audio DRC (Dynamic Range Control) has the effect of playing loud
sounds softly and soft sounds loudly. Adjust the setting for example
when viewing movies late at night and the dialogs are difficult to hear.
1
During playback, display the TOOLS menu.
Press
TOOLS
.
2
Select and set Audio Adjust.
Use
/
to select, then press
ENTER
.
3
Select and set Audio DRC.
Use
/
to select, then press
ENTER
.
4
Adjust the setting.
Use
/
to switch between
Off
,
Low
,
Medium
,
High
and
Auto
.
Closing the Audio DRC screen
Press
ENTER
or
HOME MENU
.
Note
• This only affects the Dolby TrueHD, Dolby Digital Plus and Dolby
Digital audio signals of BDs, DVDs and video files.
• When
Auto
is selected, the setting has the same effect as
High
or
Off
for Dolby TrueHD signals, depending on the content. For
Dolby Digital Plus and Dolby Digital, the setting has the same
effect as
Off
.
• Audio DRC affects the audio signals output from the following
audio output terminals:
– Analog audio signals output from the
AUDIO OUT (7.1 ch)
terminals.
– Linear PCM audio signals output from the
DIGITAL OUT
terminals or
HDMI OUT
terminals.
• The effect may be weak for some discs.
Adjusting the output level of the
different speakers during BD/DVD
playback (Channel Level)
Caution
•
Channel Level
of the speakers set to
None
or
No
at
Speaker
Setup
cannot be adjusted (page 46).
1
During playback, display the TOOLS menu.
Press
TOOLS
.
HOME MEDIA
GALLERY
MENU
DISPLAY
POPUP MENU
TOP MENU
TOOLS
ENTER
TOP MENU
TOOLS
HOME
MENU
RETURN
ENTER
Audio
Subtitle
Audio Adjust
Video Adjust
Secondary Audio
BD PLAYER
TOOLS
Audio Adjust
Audio DRC
Channel Level
Lip Sync
TOP MENU
TOOLS
HOME
MENU
RETURN
ENTER
Audio DRC
Off
HOME MEDIA
GALLERY
MENU
DISPLAY
POPUP MENU
TOP MENU
TOOLS
ENTER
