Pioneer BDP-3110, Руководство по эксплуатации

Страница: 41 / 48

06
41
Network
Problem Check Remedy
• BD-LIVE function
(connection to the
Internet) cannot be
used.
• Check your network connection or confirm your network
settings.
• The USB flash drive of files have been cleaned.
• Confirm BD-ROMs to support BD-Live function.
Others
Problem Check Remedy
The player’s power
turns off automatically.
Is HDMI CEC set to On? The player’s power may turn on together with
the power of the TV connected to the HDMI
OUT terminal. If you do not want the player’s
power to turn off when the TV’s power is turned
on, set HDMI CEC to Off.
Player cannot be
operated with remote
control.
Are you operating the remote
control from a point too far
away from the player?
Operate from within 7 m of the remote control
sensor.
Are the batteries dead? Replace the batteries.
Input of connected TV,
and AV system and
HD AV Converter
switches automatically.
Is HMDI CEC set to On? The input of the TV, and AV system (AV
receiver or amplifier, etc.) and HD AV
Converter connected to the HDMI OUT
terminal may automatically switch to the player
when playback starts on the player or the
menu screen (Home Media Gallery, etc.) is
displayed. If you do not want the inputs of the
connected TV, and AV system (AV receiver or
amplifier, etc.) and HD AV Converter to switch
automatically, set HDMI to Off.
Settings you have
made have been
cleared.
• Have you disconnected the
power cord while the player’s
power was on?
• Has there been a power
failure?
Always press

STANDBY/ON on the player’s
front panel or

STANDBY/ON on the remote
control and check that POWER OFF has
turned off from the player’s front panel display
before disconnecting the power cord. Be
particularly careful when the power cord is
connected to the AC outlet on another device
because the player turns off in conjunction with
the device.
Problem Check Remedy
Is HDMI CEC set to
On on the connected
device?
Set HDMI CEC to On on the connected device. The HDMI
CEC function operates when HDMI CEC is set to On for all
devices connected to the HDMI OUT terminal. Once
connections and settings of all the devices are finished, be
sure to check that the player’s picture is output to the Flat
Screen TV. (Also check after changing the connected
devices and connecting and/or disconnecting HDMI
cables.) If the player’s picture is not being output to the Flat
Screen TV, the HDMI CEC function may not work properly.
For details, refer to the operating instructions of the
connected device.
Are multiple players
connected?
The HDMI CEC function may not work if three or more
players, including this player, are connected by HDMI
cable.