02
15
Connecting video and audio
cables
Note:
• To output video signals from this player,
connect using one of the following (not
including when connected using an HDMI
cable): a video cable.
Connecting a TV using a video/audio
cable
Note:
• Connect the player’s video output directly
to your TV.
This player supports analog copy protection
technology. Therefore the picture may not
be displayed properly if connected to a TV
via a DVD recorder/video deck or when
playing the player’s output material that is
recorded by a DVD recorder/video deck.
Furthermore, the picture may not be
displayed properly due to the copy
protection when the player is connected to
a TV with a built-in video deck. For details,
contact the manufacturer of your TV.
TV
Direction of
signal flow
To video/audio
input terminals
Video/audio
cable (included)
Yellow
Red
White
It is also possible to connect to an AV
receiver or amplifier. Connect the audio
signals using an coaxial digital audio
cable or an audio cable (2 channels) (on
the right column).
Player’s rear panel
Notes:
• Video signals are output with a resolution of
480/576i or 480/576P when connected us-
ing a video cable.
• Depending on the output video resolution
setting, the picture may not be output.
Connecting an AV receiver
or amplifier using an coaxial
digital audio cable
Yellow
UT
Red
White
AV receiver
or amplifier
Direction of signal flow
To coaxial digital
audio input terminal
Coaxial digital audio
cable (commercially
available)
2-channel analog
audio can also be
connected.
Player’s rear panel
To audio
input
terminals
Video/audio cable (included)
Note:
• To switch the video from the AV receiver or
amplifier, also connect the video output
terminals.
Connecting components to
the USB port
About USB devices
The USB devices that can be connected to the
player are as shown below.
• USB 2.0-compatible USB flash drive
(capacity of 1 GB or greater, 2 GB or
greater recommended) or HDD (capacity 2
TB or less)
• File system: FAT16, FAT32 or NTFS
Notes:
• Devices formatted with a file system other
than the above cannot be used. Such
devices may however be usable if they are
formatted from the player.
• USB devices may not be recognized if they
contain multiple partitions.
• Some USB devices may not operate with
this player.
• Operation of USB devices is not
guaranteed.
• BD-LIVE cannot be used with NTFS file
systems. Use it with FAT16 or FAT32 file
systems.
Содержание BDP-3110
