4
BDP-170
1
2
3
4
A
B
C
D
E
F
1
2
3
4
2. SERVICE PRECAUTIONS
2.1 NOTES ON CABLE CONNECTION AND DRESSING
30mm
(1) After replacement of the MAIN BOARD Assy
or LOADER Assy, connect then dress the
cables, as shown in the photo.
(2) When the Wi-Fi 4-pin cable is disconnected,
be sure to reconnect the cable so that the
side on which the ferrite core is attached is
connected to the MAIN BOARD Assy.
(3) When the Wi-Fi 4-pin cable is to be replaced,
remove the ferrite core from the old cable
then attach it to the new cable at a place
approximately 30 mm away from the
connector, by wrapping the cable once
around the ferrite core.
MAIN BOARD ASSY
WiFi 4pin Cable
Ferrite Core
