Pioneer BCS-323, Руководство по эксплуатации

Страница: 34 / 100

Connecting 34
En
Connec
ting
2
Speaker setup for BCS-SB626
Preparing the speakers
For subwoofer:
Use the supplied adhesive to attach four large
pads to the base of subwoofer.
Large non-skid pads
For front speaker:
Assembling the speaker stands and securing
your front speaker.
1. Use the supplied adhesive to attach three
small pads to the base (bottom) of each
speaker stand.
Small non-skid pads
If you decide not to use the speaker stands,
use the supplied adhesive to attach four small
pads to the base of the speaker.
Small non-skid pads
2. Attach the speaker stand bases to the
speaker.
Attach both right and left speaker stands
to the rear of the speaker. The height of
the speaker stands can be adjusted in two
levels; select the height you prefer, and fix in
position
Caution
• Be careful not to tighten screws excessively.
• If excessive force is used to tighten screws, the
threads of screw may be damaged. Use a middle-
sized manual screwdriver during assembly.
• Do not use power screwdrivers or oversized
screwdrivers that may exert excessive force on the
screws.
• Confirm that no foreign matter is stuck to the stand
or the speaker during assembly.
• If the unit is assembled with foreign matter stuck
between the stand and the speaker the unit may
not be assembled securely, resulting in tipping or
falling.