When the AUX (auxiliary input) is set to off
(refer to page 63).
When
AV INPUT1
(video input 1) and/or
AV INPUT2
(video input 2) are not set to
VIDEO
(refer to page 65).
!
External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
Loading a disc
%
Insert a disc into the disc loading slot.
Playback will automatically start.
#
When a disc is loaded in this unit, press
AV SOURCE
to select
DVD
.
#
If
DVD D. AUTO
is turned off, press
AV SOURCE
to select
DVD
(refer to the previous
page).
#
If
DVD A. PLAY
is on,
SOME DISCS MAY
NOT FULLY OPERATE ON THIS SYSTEM
is dis-
played. (Refer to
Automatic playback of DVDs
on
page 61.)
#
To eject a disc, press
EJECT
.
Notes
!
The DVD player plays one, standard, 12-cm or
8-cm (single) disc at a time. Do not use an
adapter when playing 8-cm discs.
!
Do not insert anything other than a disc into
the disc loading slot. Discs which can be
played back are listed on
Playable discs
on
page 8.
!
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT
to eject the disc, and check the
disc for damage before inserting it again.
!
If the DVD player does not operate properly,
an error message such as
ERROR-02
may be
displayed. Refer to
Error messages
on page 73.
!
If bookmark function is on, DVD playback re-
sumes from the selected point. For more de-
tails, refer to
Resume playback (Bookmark)
on
page 32.
Turning the unit off
IP-BUS mode (
S
)
%
Turn this unit off from your head unit.
Refer to the head unit operation manual.
#
If you press
AV SOURCE
and hold to turn this
unit off,
Power off (POWER OFF)
appears on the
head unit
s display.
ADD-ON mode (
M
)
%
When using the touch panel keys,
touch the source icon and then touch
SOURCE OFF.
#
When the source icon is not displayed, you
can display it by touching the screen.
%
When using the button, press
AV SOURCE and hold until the unit turns
off.
Using the rear display
You can watch a DVD/Video CD on the rear
display regardless of whether
DVD
(built-in
DVD player) is selected as the source or not.
!
To watch a DVD/Video CD on the rear dis-
play only, switch the operation mode on the
remote control to
DVD
. And you can oper-
ate the DVD/Video CD playback on the rear
display independently by the remote con-
trol. (Refer to page 17.)
Basic Operations
En
20
Section
04
