Pioneer AVX-505 Скачать руководство пользователя страница 69

Страница: 69 / 72

AVX-505

Storage

1. The system operates the position motor forward 5

seconds after the OPEN/CLOSE key is pressed or

ACC is set to OFF. The system continues to operate

the motor until the Position Sensing switch (Lift

switch) is set to OFF.

2. The system stops the position motor when the

Position Sensing switch (Lift switch) is set to OFF,

then operates the angle motor at slow speed.

3. The system stops the angle motor when the Angle

Sensing switch (Angle 0 switch) is set to ON and at

the point when angle pulse ceases to be output, then

operates the position motor at high speed. The

system starts stop operation by the error timer when

the monitor mechanically comes in contact at

completion of storage.

Adjustment of angle

1. For example, when the UP key is pressed at the initial

position (approx. 90 degrees), the system moves the

position motor to the utmost end at slow speed. The

system moves the angle motor for 1 wave of angle

pulse in Slow mode 1 second after

forward/backward pulses cease to be output. Then,

the system enters Brake mode.

2. After approximately 3 seconds, the system moves

the position motor at slow speed and stops the

motor when forward/backward pulse is not output

(Brake mode). The system operates in the same

manner when the DOWN key is pressed.

Notes) Position motor······· Motor to drive the display

forward/backward.

Angle motor··········· Motor to drive the display

angle upward/downward.

Precautions:

1. The system constantly adds/deducts the angle

position, and saves the last position for the next

starting up.

2. If the system does not receive specified pulses during

operation, the system judges it as abnormal

operation and stops at that position.

3. The system enters Brake mode 32 ms + approximat-

ely 200 µs after detecting the specified angle pulse L.

Withdraws slowly.

Comes in contact

mechanically.

Angle encoder pulse

Brake output

200µsec.

Содержание AVX-505









































































Результаты поиска

Содержание AVX-505

Отзывы:

Похожие инструкции для AVX-505

Бренды по названию

Популярные бренды

Pioneer AVX-505, Руководство по обслуживанию

Результаты поиска

Содержание AVX-505

Отзывы:

Похожие инструкции для AVX-505

Бренды по названию

Популярные бренды